Double and Single Synergic Pulse MIG Power i-MIG 353DPi

[lugweld]

If you haven't seen the new addition to the Pulse MIG line up from Everlast, Everlast not only has one synergic single and double Pulse MIG it now has two that are single and double pulse MIGs. The New Power i-MIG 353DPi is available with a separate wire feeder which can be detached and carried to where you are working. With 350 amps and a 60% duty cycle this unit is built for serious industrial and commercial use. It comes with a watercooler and cart, ready for use. It will support push-pull, or spool gun use as well as a teflon liner with the standard Gun to feed aluminum. It has settings for Steel, Stainless, Aluminum, and Silicone Bronze Brazing.
It comes with the standard 5 year warranty. It is single phase 240 and can operate on 3 phase 480V.

[tired]

don't see many reviews on this MIG 353DPI

[Rondo]

don't see many reviews on this MIG 353DPI

I'd like to run one of these. Only change i'd like would be digital readout at the feeder. Is it push pull ready? I have a similar type ( different brand ) an may be in the market for something like this.

[lugweld]

Yes it is push-pull ready. The majority of the unit setup takes place on the machine when making changes to the necessary but ancillary settings. The actual welding Amperage and Voltage offeset is only controlled on the feeder. It is reflected on the face of the unit.