Results 1 to 2 of 2

Thread: *FREE* Esab 252 Welder in Massachusetts on the north shore in Lynn

  1. #1
    Join Date
    Jun 2010
    Location
    Massachusetts
    Posts
    547
    Post Thanks / Like

    *FREE* Esab 252 Welder in Massachusetts on the north shore in Lynn

    Doing a shop clean out and have an Esab 252 sitting at the shop that I need to part with unfortunately... I leased the building out and am under the gun to get the place cleaned out. Going to grab an inverter one of these days... I haven't tested it.. and can't due to the flaky electrical in the building, but I taught myself to tig and stick wel with it, and it worked great.

    I'm going to be putting it outside for the scrappers in the next few days, but figured I'd toss it on here first.

    Interested party will need to bring an engine hoist... It has a lifting eye should be straightforward to get it into a pickup. Weighs 400lbs so not easily lifted...

    I think it might have a torch still attached, but you'll need the pedal, leads, etc.

    SSC still makes the pedal, I think I have one here but I'll probably toss it on ebay to recover a few bucks.

    If anyone's feeling sorry for getting such a free great deal I'm looking for a small 6" jointer
    ESAB Heliarc 252

  2. #2
    Join Date
    Jul 2014
    Posts
    65
    Post Thanks / Like

    Re: *FREE* Esab 252 Welder in Massachusetts on the north shore in Lynn

    If I were about 1500 miles closer, I'd definitely take ya up on that..

    Sent from my LG-H700 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,597,252,519.20473 seconds with 13 queries