Results 1 to 5 of 5

Thread: Engine valves

  1. #1
    Join Date
    Jul 2012
    Posts
    803
    Post Thanks / Like

    Engine valves

    Video on reworking valves on engine.


  2. Likes BYW200 liked this post
  3. #2
    Join Date
    Oct 2013
    Location
    cntrl FL
    Posts
    964
    Post Thanks / Like

    Re: Engine valves

    Thanks for the Video! Good alternative to spending a fortune at the machine shop.
    SA 200s : 1944 1945 1963 1965 1969 1980
    1981 SA 250 D3.152 DC only
    2004 Ranger 10,000
    Lincoln Pro Mig 135
    Miller Load Bank
    Hobart GPB 258 Pipeliner
    Hobart GPB 261 Mainliner
    Hobart Airforce 250
    Everlast PA 200st

  4. #3
    Join Date
    Jul 2012
    Posts
    803
    Post Thanks / Like

    Re: Engine valves

    Your welcome, this guy did a great job. When working on my short hood could not find any information. Finally cleaned the valve and seat and found a stone to lightly grind it. Then lapped the valve.

  5. #4
    Join Date
    Jul 2012
    Posts
    803
    Post Thanks / Like

    Re: Engine valves

    Here is some more video on vales.


  6. #5
    Join Date
    Oct 2013
    Location
    cntrl FL
    Posts
    964
    Post Thanks / Like

    Re: Engine valves

    Good tutorial, There's a lot of money tied up in thoses cutter heads and guides.
    SA 200s : 1944 1945 1963 1965 1969 1980
    1981 SA 250 D3.152 DC only
    2004 Ranger 10,000
    Lincoln Pro Mig 135
    Miller Load Bank
    Hobart GPB 258 Pipeliner
    Hobart GPB 261 Mainliner
    Hobart Airforce 250
    Everlast PA 200st

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,604,019,291.15628 seconds with 14 queries