Encoder on Dynasty 350

[Brockenhammer]

Hi,
I own a Dynasty 350 (year 2013) which is a not very common machine here in germany. It´s a very clean machine and it has very little hrs.
However, it welds fine, but im wondering about the behavior of the encoder.
When I change settings at the encoder wheel it sometmes jumps forward and backward when I turn it faster. If I turn slowly it does what I expect.
I have other machines from different manufacturers and it´s possible to turn the knob much faster, without that "jumping" of the value.
Is that normal for the Dynasty?? or do I have to get nervous?
Thank you.
Kai

[filetobeef]

some encoders do this sometimes. try opening it and clean it,electrical contact cleaner or blow air in it.

[ccawgc]

Some miller encoders just don't like turning fast. if you turn to fast they jump around.
Just slow down a little till it adjusts smoothly.