Results 1 to 12 of 12

Thread: New Multi-Process? New TIGs? New MIGs?

  1. #1
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,057
    Post Thanks / Like

    New Multi-Process? New TIGs? New MIGs?

    Everlast has quite a few new things in the works. We think they'll be revolutionary. But we've been delayed a bit in the development area by the Covid monster or a lot more would be out by now. But look for things along the way as we firm up delivery and specs, heading into the last of the year, and into 2021 early.

    But in the mean time, if you have a wish list of features and products, let us hear from you.

    Just post away.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  2. #2
    Join Date
    Oct 2011
    Posts
    8
    Post Thanks / Like

    Re: New Multi-Process? New TIGs? New MIGs?

    By any chance, will any of the new machines have the pulse function with electrode welding?

  3. #3
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,057
    Post Thanks / Like

    Re: New Multi-Process? New TIGs? New MIGs?

    For TIG and MIG yes. Stick pulse is still in its infancy and not an approved type of process afik. So, not stick will not be available in pulse.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  4. #4
    Join Date
    Oct 2011
    Posts
    8
    Post Thanks / Like

    Re: New Multi-Process? New TIGs? New MIGs?

    Thanks for the heads up.

  5. Likes lugweld liked this post
  6. #5
    Join Date
    Oct 2015
    Posts
    2,734
    Post Thanks / Like

    Re: New Multi-Process? New TIGs? New MIGs?

    I have an MTS250S . The stick function on it IMHO is very poor. It does ok with DC Tig . Are you guys going to put out a 250 amp class mig that just does mig? Unless a machine does a process well it is not worth having especially stick welding seeing as it is a basic fall back process on small jobs that can not or should not be done with mig. The only time I have used the tig function was to try it out, with it needing a different gas than mig it is not the best idea to have it on a mig machine. Also IMHO synergic function is only of any value if a person does not know how to setup a mig welder. I was not a weekend warrior before I retired last year . When I got the MTS I thought I could use it instead of having a suitcase wire feeder for field work. That did not work out well and I wound up purchasing a suitcase feeder anyway. I do like the way it mig welds but I never use synergic .

  7. #6
    Join Date
    May 2013
    Posts
    2
    Post Thanks / Like

    Re: New Multi-Process? New TIGs? New MIGs?

    Quote Originally Posted by lugweld View Post
    For TIG and MIG yes. Stick pulse is still in its infancy and not an approved type of process afik. So, not stick will not be available in pulse.
    What is the approximate ETA (for sale) for these new machines?

  8. #7
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,057
    Post Thanks / Like

    Re: New Multi-Process? New TIGs? New MIGs?

    Late first quarter of next year.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  9. #8
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,057
    Post Thanks / Like

    Re: New Multi-Process? New TIGs? New MIGs?

    Quote Originally Posted by thegary View Post
    I have an MTS250S . The stick function on it IMHO is very poor. It does ok with DC Tig . Are you guys going to put out a 250 amp class mig that just does mig? Unless a machine does a process well it is not worth having especially stick welding seeing as it is a basic fall back process on small jobs that can not or should not be done with mig. The only time I have used the tig function was to try it out, with it needing a different gas than mig it is not the best idea to have it on a mig machine. Also IMHO synergic function is only of any value if a person does not know how to setup a mig welder. I was not a weekend warrior before I retired last year . When I got the MTS I thought I could use it instead of having a suitcase wire feeder for field work. That did not work out well and I wound up purchasing a suitcase feeder anyway. I do like the way it mig welds but I never use synergic .
    That is an old machine now. Things are much different in technology. But we did not classify that welder you have for 6010.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  10. #9
    Join Date
    Oct 2011
    Posts
    8
    Post Thanks / Like

    Re: New Multi-Process? New TIGs? New MIGs?

    I was looking into buying a lightning mts 275 but it only has pulse tig. Will any of the new machines be one with pulse mig and tig together?

  11. #10
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,057
    Post Thanks / Like

    Re: New Multi-Process? New TIGs? New MIGs?

    Not in the forseeable near future. The 251Si has a manual, non synergic Pulse MIG, but it is dc only. I may have said yes in March, but anything like that we have had in the works has been delayed in favor of concentrating on other more in demand products, and closer to finish to be brought to market first during the covid interruption, and have been delayed.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  12. #11
    Join Date
    Nov 2020
    Posts
    1
    Post Thanks / Like

    Re: New Multi-Process? New TIGs? New MIGs?

    Would really love to see a multiprocess machine that includes pulse for both mig and tig. More specifically double pulse mig on stainless steel as no other machine offers that except for some really high end ones.

    I work primarily with thin gauge stainless steel (16 gauge 304ss) building custom exhaust systems. I flop between mig/tig a lot with a small amount of aluminum fab in between.

    The MTS225 is close to a perfect package but needs to incorporate mig pulse as well. More specifically, the double pulse mig for stainless function would be amazing.

    All of the multiprocess machines currently available do not offer a double pulse function for metals other than aluminum on mig. Having the double pulse function for mig stainless would be a game changer for me and an instant purchase!

  13. #12
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,057
    Post Thanks / Like

    Re: New Multi-Process? New TIGs? New MIGs?

    Its not in the works.

    However, the Power i-MIG 253DPi is MIG/Stick with single and double pulse. Single pulse has been discussed but not currently in near future plans. Double pulse will likely be too much to add into the programming and memory of the machine with stick and AC/DC TIG features as well and keep it compact enough to make a reasonable size.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,606,313,337.52790 seconds with 14 queries