Results 1 to 4 of 4

Thread: TD 38xl tips

  1. #1
    Join Date
    Oct 2020
    Posts
    12
    Post Thanks / Like

    TD 38xl tips

    Picked up a used 38xl at an auction. $75 bucks so not the end of the world if it doesn't work. So far it turns on, AC light comes on, gas light is on. No DC light and it will only strike an arc for a split second intermittently. I'm look at the bag of TD electrodes and tips that came with it and think I may have the wrong ones. Also the ceramic gas ring is burnt pretty good. It came with 9-6501 tips and 9-6006 electrodes. All the info I can find says I should have 9-6501 tips and 9-6506 electrodes. Is this correct? What the difference between the 6506 and 6006 electrodes?

  2. #2
    Join Date
    Oct 2020
    Posts
    12
    Post Thanks / Like

    Re: TD 38xl tips

    Not sure if this bit of troubleshooting says anything but with all tips and electrodes installed I get nothing but an intermittent spark and no DC light. With all tips and electrodes removed I can get spark and the DC light is on.

  3. #3
    Join Date
    Oct 2020
    Posts
    12
    Post Thanks / Like

    Re: TD 38xl tips

    Sorry for the duplicate thread. I wanted to put it in the "Other" forum but couldn't figure out how to delete this. Doesn't seem like this forum gets any traffic

  4. #4
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    3,668
    Post Thanks / Like

    Re: TD 38xl tips

    go see you other thread.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,606,463,099.45295 seconds with 13 queries