Results 1 to 6 of 6

Thread: Invertig 221

  1. #1
    Join Date
    Jul 2020
    Location
    MA
    Posts
    5
    Post Thanks / Like

    Invertig 221

    Hi, I just bought an Invertig 221. I have a Pro pulse 300, I'd like to put them together on one cart. I've already experienced what high frequency can and will do to electronic devices nearby. Cost $800 to replace a board on my brand new LN 25. So can I ground the machine and be safe, or separate carts?
    Haksa

  2. #2
    Join Date
    Mar 2005
    Location
    Under a Rock
    Posts
    5,492
    Post Thanks / Like

    Re: Invertig 221

    Have you contacted HTP to see what they have to say?
    Miller 211
    Hypertherm PM 45
    1961 Lincoln Idealarc 250
    HTP 221


    True Wisdom only comes from Pain.

  3. #3
    Join Date
    Jul 2020
    Location
    MA
    Posts
    5
    Post Thanks / Like

    Re: Invertig 221

    not yet

  4. #4
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    5,107
    Post Thanks / Like

    Re: Invertig 221

    I have my Invertig right next to my ProPulse 300. Never had any issues, although I suppose that doesn't answer your question. The machine case is grounded via a short ground wire on the inside, granted it is not a separate actual ground path, but still "eventually" is connected to ground.
    Last edited by Oscar; 1 Week Ago at 07:48 AM.
    1st on WeldingWeb to have a scrolling sig!

    HTP Invertig 400
    HTP Invertig 221
    HTP ProPulse 300
    HTP ProPulse 200 x2
    HTP ProPulse 220MTS
    HTP Inverarc 200TLP
    HTP Microcut 875SC

  5. #5
    Join Date
    Jul 2020
    Location
    MA
    Posts
    5
    Post Thanks / Like

    Re: Invertig 221

    Thanks Oscar, your th

  6. #6
    Join Date
    Dec 2003
    Location
    Fairfield,CT
    Posts
    1,380
    Post Thanks / Like

    Re: Invertig 221

    Look up Jimbo's Garage on YT and IG. He has like 3 or more HTPs together on one cart. He never said he had an issue either.
    www.tjsperformance.com
    Dynasty 300 DX
    HTP 240
    HTP Microcut 380
    Hyperthem 85
    JD2 Hyd Bender and HF Hyd Ring Roller all in one =(Frankenbender)
    Bpt. Mill/DRO
    4' x 8' CNC Plasma Table
    Instagram: tjsperformance
    YT: TJS Welding and Fabrication

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,603,738,556.83317 seconds with 13 queries