Results 1 to 2 of 2

Thread: Kicking Horse welders

  1. #1
    Join Date
    Oct 2020
    Location
    Richmond, Canada
    Posts
    22
    Post Thanks / Like

    Kicking Horse welders

    https://kickinghorsewelders.ca/index...roducts_id=440

    This is a Canadian brand. They do sell welders to the States. Wondering if any of you have any experience with these welders.

    This flux core and the arc welder they have are good for the DiYer which is kind of what I am looking for. Seems like decent quality for the price.

    Sent from my Pixel 3 XL using Tapatalk

  2. #2
    Join Date
    Jan 2005
    Posts
    4,153
    Post Thanks / Like

    Re: Kicking Horse welders

    Quote Originally Posted by Ch4p View Post
    https://kickinghorsewelders.ca/index...roducts_id=440

    This is a Canadian brand. They do sell welders to the States. Wondering if any of you have any experience with these welders.

    This flux core and the arc welder they have are good for the DiYer which is kind of what I am looking for. Seems like decent quality for the price.

    Sent from my Pixel 3 XL using Tapatalk
    No experience with that brand. Did make the short list when I was looking for something similar. Ended up with a klutch 140 instead.. The clutch had a valve in torch gun and could do mig.. Ditched it and modified a Tweco Mini gun to work as a flux-core only gun.. The factory gun was just club with a 20 pound trigger pull..The Kicking horse will have no issues there. My friend bought the Century 140 and is happy with that unit but 4 inch spools only, and no real handle like my Klutch. He has a Klutch 140i but is the higher spec unit then mine.. We both have been buying these Cheaper flux-core, DC stick , and plasma machines in 120 volt lately (separate machines) and they are great value, and work perfect..Impressive as all get out.. I say go for it,but buy from Amazon so you can exchange it if it does not work out,..

    https://www.amazon.com/KickingHorse-...s%2C268&sr=8-2
    Last edited by Brand X; 10-23-2020 at 10:56 PM.
    Esab/Lorch ET-220i
    Esab 160i caddy
    Thermal LM-200 Lincoln feeders
    Thermal Pee-Wee 85s
    Thermal 60i- 3phase /RPC powered (Beast)
    Thermal Drag-gun 35C
    INE 1500
    Klutch 140i

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,607,088,154.72789 seconds with 13 queries