Kicking Horse welders

[Ch4p]

https://kickinghorsewelders.ca/index...roducts_id=440

This is a Canadian brand. They do sell welders to the States. Wondering if any of you have any experience with these welders.

This flux core and the arc welder they have are good for the DiYer which is kind of what I am looking for. Seems like decent quality for the price.

Sent from my Pixel 3 XL using Tapatalk

[Brand X]

https://kickinghorsewelders.ca/index...roducts_id=440

This is a Canadian brand. They do sell welders to the States. Wondering if any of you have any experience with these welders.

This flux core and the arc welder they have are good for the DiYer which is kind of what I am looking for. Seems like decent quality for the price.

Sent from my Pixel 3 XL using Tapatalk

No experience with that brand. Did make the short list when I was looking for something similar. Ended up with a klutch 140 instead.. The clutch had a valve in torch gun and could do mig.. Ditched it and modified a Tweco Mini gun to work as a flux-core only gun.. The factory gun was just club with a 20 pound trigger pull..The Kicking horse will have no issues there. My friend bought the Century 140 and is happy with that unit but 4 inch spools only, and no real handle like my Klutch. He has a Klutch 140i but is the higher spec unit then mine.. We both have been buying these Cheaper flux-core, DC stick , and plasma machines in 120 volt lately (separate machines) and they are great value, and work perfect..Impressive as all get out.. I say go for it,but buy from Amazon so you can exchange it if it does not work out,..

https://www.amazon.com/KickingHorse-...s%2C268&sr=8-2