-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
KWilliams40
It's better than any other hood I've used. Can't tell you about durability yet(SpeedGlas currently wins in this department).
So, I think it's a really worthwhile model. As for durability, time will tell, I think the mask will serve its time.
-
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
This welding hood is best I used its after Hobart , hobart has low quality as compare to optrel panoramaxx CLT 2.0 I will recommended to welders
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Which Hobart model did you use?
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Last edited by michaelbosman342; 03-04-2021 at 08:58 AM.
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
DannyPhilips
Which Hobart model did you use?
I used this model of hobart.
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Comparing a $300 helmet to a $700 helmet... 12 yr old technology to the latest.... not hard to see who will win.
250 amp Miller DialArc AC/DC Stick
F-225 amp Forney AC Stick
230 amp Sears AC Stick
Lincoln 180C MIG
Vevor MIG 200A
Victor Medalist 350 O/A
Vevor Cut 50 Plasma
Les
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
michaelbosman342
I used this model of hobart.
Thank you so much!
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
What about the nose cutout? Some guys say the nose cutout will slam down on their nose when they're flipping the helmet down.
Does the nose cutout provide enough room for the nose bridge of safety glasses?
What about the nose cutout pad? The nose cutout pad is not mentioned in the video. How does the pad attach to the helmet?
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
KWilliams40
It's better than any other hood I've used. Can't tell you about durability yet(SpeedGlas currently wins in this department).
Supposedly, the Quattro doesn't have the 2.0 lens that the Panoramaxx CLT does. But the Quattro goes up to shade 13. The CLT maxes out at 12.
Source for info is Baker's Gas.
-
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
Oscar
Yup, you can find all the info on the Optrel website. undarkened state is shade-3, and goes up to 13.
But in the darkened state, the view in the Quattro and the CLT will look the same; correct?
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
dude all the filters in any modern name brand helmets are good ,as far as how well you can see. the differences are in the head gear design. pivoting design. button location for the adf etc
hypertherm powermax 30xp
fronius transpocket 180
fronius transsteel 2200
fronius iwave 230i water cooled
hobart handler 100
-
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
Wamsutta
But in the darkened state, the view in the Quattro and the CLT will look the same; correct?
try a couple on for comfort and buy the best one you can afford.
:
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
Lis2323
try a couple on for comfort and buy the best one you can afford.
I wish I could. None of the welding stores around here have them.
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
ill send you mine just pay shipping. if you like it give me $50 if not just send it back
hypertherm powermax 30xp
fronius transpocket 180
fronius transsteel 2200
fronius iwave 230i water cooled
hobart handler 100
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
cornchip
ill send you mine just pay shipping. if you like it give me $50 if not just send it back
Which Optrel model do you have?
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
e684. its a bit different than the one your asking about but you can try it if you want
hypertherm powermax 30xp
fronius transpocket 180
fronius transsteel 2200
fronius iwave 230i water cooled
hobart handler 100
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
cornchip
e684. its a bit different than the one your asking about but you can try it if you want
That sounds tempting. What's wrong with it?
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
Wamsutta
That sounds tempting. What's wrong with it?
it says "Optrel" on it.
for an additional $50 cornchip will paint it over and draw a Soeedglass logo on with a permanent marker.
:
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
Lis2323
it says "Optrel" on it.
for an additional $50 cornchip will paint it over and draw a Soeedglass logo on with a permanent marker.
too late to edit my spelling error.
"Soeedglass" logo......the true give away that it's a knockoff. LOL
:
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
not a single thing wrong with it. infact its never even been used outside lol
hypertherm powermax 30xp
fronius transpocket 180
fronius transsteel 2200
fronius iwave 230i water cooled
hobart handler 100
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
Lis2323
too late to edit my spelling error.
"Soeedglass" logo......the true give away that it's a knockoff. LOL
Whadaya call a knock off Speedglas? A Speedless.
Sent from my Lincoln Buzzbox using Tapatalk
Sent via smoke signals using my Lincoln buzzbox
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear
Originally Posted by
cornchip
infact its never even been used outside
....the country.
sorry cornchip. couldn't help myself. lol
:
-
Post Thanks / Like - 1 Likes, 0 Dislikes