Results 1 to 5 of 5

Thread: invertec 350pro advanced process panel

  1. #1
    Join Date
    Oct 2018
    Location
    van island
    Posts
    11
    Post Thanks / Like

    invertec 350pro advanced process panel

    hello all
    i am looking for the advanced process panel for my invertec 350
    was hoping some one might have one in their "bone yard" they would part with
    thanks
    brett
    syncrowave 250 dx
    bernard cooler
    miller cp300 converted
    miller xra push pull
    thermal arc dual digital wire feed
    esab dip pak 250

  2. #2
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    3,791
    Post Thanks / Like

    Re: invertec 350pro advanced process panel

    There are three types of v350s Contractor model. factory and advanced process.
    The contractor model can not be changed into an advanced model. no wires for the advanced process panel or feeders. The factory model can be upgraded to the advanced process. So you need a welder with both a 14 pin and 6 pin plugs.
    Post your code number and we can figure it out.
    Or go to Lincoln's web site and look up the parts tab and it will take you to the service navigator, enter your code number and see the owner's manual and parts books.

  3. #3
    Join Date
    Oct 2018
    Location
    van island
    Posts
    11
    Post Thanks / Like

    Re: invertec 350pro advanced process panel

    thanks for reply
    i do have both plugs code number is 10874
    very little info or sources to buy
    most say discontinued
    thanks
    brett
    syncrowave 250 dx
    bernard cooler
    miller cp300 converted
    miller xra push pull
    thermal arc dual digital wire feed
    esab dip pak 250

  4. #4
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    3,791
    Post Thanks / Like

    Re: invertec 350pro advanced process panel

    Code number does say it is a factory model.
    A conversion kit may be not available but the parts appear to be. But they are all made to order. Made to order parts take a couple of weeks and can't be canceled or returned. Could cost up to $2000 or more to make this conversion. Parts book is a little vague and I am not sure what to order. You will have to talk to lincoln tech support and see if somebody has a parts list for a conversion OR price a powerwave C300 or other model. Looks like prices start at $5700 for a powermig 350mp and go up for power wave s350, c300 $6500 to $7500 or more.
    I would need an advanced model next to the factory model to be able to make up a kit by my self. So call Lincoln or email them and see what they will say.

  5. #5
    Join Date
    Oct 2018
    Location
    van island
    Posts
    11
    Post Thanks / Like

    Re: invertec 350pro advanced process panel

    i do have a rep working on it
    was just hoping someone in the usa would have a used one up for grabs
    but your probably right i may have to upgrade to a power wave and compatible feeder down the road
    thanks
    brett
    syncrowave 250 dx
    bernard cooler
    miller cp300 converted
    miller xra push pull
    thermal arc dual digital wire feed
    esab dip pak 250

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,614,297,319.76328 seconds with 13 queries