Results 1 to 4 of 4

Thread: Looking for Carb for sa200 F162 with vacuum idler

  1. #1
    Join Date
    Oct 2015
    Posts
    2
    Post Thanks / Like

    Looking for Carb for sa200 F162 with vacuum idler

    Looking for a rebuilt or used replacement carb for SA200 f-162. I,m trying to see if this welder is worth putting any money into it without spending 400$ on a new carb just to see if it will weld. A brand new from weldmart is 398.50 + tax so if anyone has a lead on one I could sure use it. The one on the machine is junk and it is a Marvel Schebler TSX514, thanks

  2. #2
    Join Date
    Oct 2014
    Posts
    3,067
    Post Thanks / Like

    Re: Looking for Carb for sa200 F162 with vacuum idler

    Maybe see if someone like Stump's or Bill's Welder Repair has a used carb. With an F162 I'd guess it's a redface so is desirable if it works and maybe even if it doesn't.

  3. #3
    Join Date
    Mar 2009
    Posts
    3,555
    Post Thanks / Like

    Re: Looking for Carb for sa200 F162 with vacuum idler

    Quote Originally Posted by rondobsalot View Post
    The one on the machine is junk and it is a Marvel Schebler TSX514
    How bad is it? Like drug up out of ocean bad after 50 years or just need a good cleaning? A carb kit can be had from NAPA for ~ $20.
    "You can't out puke a buzzard"

  4. Likes 12V71 liked this post
  5. #4
    Join Date
    Jul 2012
    Posts
    808
    Post Thanks / Like

    Re: Looking for Carb for sa200 F162 with vacuum idler

    Those old carbs are pretty tough, try a good cleaning.
    https://www.instructables.com/Electr...val-aka-Magic/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,611,846,771.45027 seconds with 14 queries