Results 1 to 9 of 9

Thread: Rubber seal for lifting eye?

  1. #1
    Join Date
    Oct 2020
    Location
    Sierras
    Posts
    4
    Post Thanks / Like

    Rubber seal for lifting eye?

    looking for a source for the rubber seal that fits around the lifting eye on the top of my Ranger 9. thanks!

  2. #2
    Join Date
    Nov 2009
    Location
    Hellinois
    Posts
    5,814
    Post Thanks / Like

    Re: Rubber seal for lifting eye?

    If you can't find anything, you can try a truck tire shop and ask for a piece of old innertube???
    "Where's Stick man????????" - 7A749
    "SHHHHHH!! I sent him over to snag that MIC-4 while tbone wasn't looking!" - duaneb55
    "I have bought a few of Tbone's things unlike Stick-Man who helps himself" - TozziWelding
    "Stick-man"

  3. #3
    Join Date
    Sep 2015
    Location
    SE Pa
    Posts
    1,905
    Post Thanks / Like

    Re: Rubber seal for lifting eye?

    What about something like thisName:  00877EA3-4167-409F-9079-A0016075953E.jpg
Views: 177
Size:  91.9 KB

  4. #4
    Join Date
    Mar 2018
    Location
    Stokes County, NC
    Posts
    239
    Post Thanks / Like

    Re: Rubber seal for lifting eye?

    I just looked in my Ranger 8 parts manual pdf and it isn't shown. Have you tried calling Lincoln? They have found parts for me before that were not listed in any available publication and which dealers and service centers had told me were no longer available.

    Best regards and good luck,
    Lance

    Miller/Smith heavy duty torch set
    Multimatic 255 w/MDX-250 EZ-Select gun
    9" Evolution circular saw

  5. #5
    Join Date
    Apr 2006
    Location
    Soda springs,Id
    Posts
    5,339
    Post Thanks / Like

    Re: Rubber seal for lifting eye?

    It will take some work to cut out the center slot but go find some skirt/flashing rubber at an aggregate plant. They probably have some used stuff you could use.
    Ol' Stonebreaker
    "Experience is the name everyone gives to their mistakes"
    Hobart G-213 portable
    Miller 175 mig
    Miller thunderbolt ac/dc stick
    Victor O/A setup
    Makita chop saw

  6. #6
    Join Date
    Oct 2020
    Location
    Sierras
    Posts
    4
    Post Thanks / Like

    Re: Rubber seal for lifting eye?

    Many thanks for all replies! Found it from Lincoln after a long phone search by them. Part # S12934-1 $4.19

  7. Likes LanceR liked this post
  8. #7
    Join Date
    Jan 2008
    Location
    Richmond, Virginia
    Posts
    7,122
    Post Thanks / Like

    Re: Rubber seal for lifting eye?

    A good source for part inquiries is Stumpf Welding Supplies. Been around since 1952.

    https://stumpfweldingsupplies.com/

    Also Welding Supply (since 1950).

    https://weldingsupply.com/cgi-bin/ei...UNDEF:X:S12934

    Did you get that one from Bill's Welder Repair?
    Last edited by Oldendum; 01-22-2021 at 02:04 PM.
    "USMCPOP" First-born son: KIA Iraq 1/26/05
    Syncrowave 250 w/ Coolmate 3
    Dialarc 250, Idealarc 250
    SP-175 +
    Firepower TIG 160S (gave the TA 161 STL to the son)
    Lincwelder AC180C (1952)
    Victor & Smith O/A torches
    Miller spot welder

  9. Likes ronsii liked this post
  10. #8
    Join Date
    Oct 2020
    Location
    Sierras
    Posts
    4
    Post Thanks / Like

    Re: Rubber seal for lifting eye?

    Lincoln had it in stock. thanks for the sources and your sacrifice!

  11. #9
    Join Date
    Jan 2021
    Posts
    1
    Post Thanks / Like

    Re: Rubber seal for lifting eye?


  12. Dislikes Pipeliner disliked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,614,514,914.05518 seconds with 13 queries