Page 2 of 2 FirstFirst 12
Results 26 to 27 of 27

Thread: Welding Deep Fryer Baskets

  1. #26
    Join Date
    Apr 2010
    Posts
    2,938
    Post Thanks / Like

    Re: Welding Deep Fryer Baskets


    tapwelder


    Quote Originally Posted by tapwelder View Post
    That reminds me. I have not seen my can of Solar Flux in forever.
    My source quotes 58.00$ a pint can - it's worth looking for . . .

    It's utility is to prevent 'sugaring' - [related to carbide precipitation?]
    S/F - prevents oxidation when the puddle depth/bottom penetrates
    the opposite surface.

    Even with solid sections [of depth] it is problematic - it is a 'no-go' on
    sections this small . . .

    hth


    Opus



    .

  2. #27
    Join Date
    Nov 2005
    Location
    Nashville, TN
    Posts
    4,036
    Post Thanks / Like

    Re: Welding Deep Fryer Baskets

    Not so sure it bridges. I have never gotten it to build up in air. A nice fillet isn't gonna reach up and grab a shortened wire.

    I agree brazing could be a solution, though one is at the mercy of the basket condition. It would be perfect if all that was needed was refitting and clamping. Also, there is cleaning the basket for brazing...

  3. Likes ronsii liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,614,528,494.36193 seconds with 14 queries