Still loving the multimatic 235

[evan]

This is with 030 lincoln wire.
Im making an attempt to start making my stuff look good.

Outside corners are at 19.5v 385 imp
1/4" material

Inside is 20.9/440

She's burned a 44lb 035 spool now. Im testing a 12lb spool of superarc 030. So far i like it.

Last pic left weld is 035 right weld 030 both at 21v

There still seems to be a lack of internet exposure on this machine so far i like everything about it.

You can spin the ipm dial and itl burn it

Ive played with it to 25v and 500 ish ipm still lays it down though i had to stop to darken my hood.

Its definitely helping me get better

Sent from my SM-G781U using Tapatalk

[flushcut]

Outside corners look good but personally I would add a little more voltage to the beads on the pad of beads.