ReplyNot sure what a mag transformer is but I know where an SP200 can be had.
WeldingWeb Tradesman
I need a mag transformer for an SP200. Lemme know what ya got. Thanks.
Lincoln 210 MP
Lincoln 180 Mig
Lincoln 3350 2.0
CK CK17FV
CK CK9FV
WeldingWeb Artisan
Not sure what a mag transformer is but I know where an SP200 can be had.
Master Welder
technically It is a magnetic amplifier. Uses a small amount of DC current in the center coil to control much larger AC current in the outside coils.
Looking at the picture, if the burnt coil is still in one piece you might be able to bend it back into shape. then use small shims to hold it in place. You also need to look into was caused the coil to overheat. shorted weld diode maybe.
Last edited by ccawgc; 11-11-2020 at 11:11 PM.
Master Welder
Looks simple to rewind
Pull two bolts and 15 turns of aluminum flat bar and it done.
Dave
Originally Posted by One1
I need a mag transformer for an SP200. Lemme know what ya got. Thanks.
WeldingWeb Artisan
Just a thought for my fellow WW members. The man is looking for a new one. He didn’t say he wanted to rewind or repair.
Master Welder
Just a thought for Joker11,
In the other thread "The MAN" mentioned rebuilding it. try to keep up, OK?
Miller 211
Hypertherm PM 45
1961 Lincoln Idealarc 250
HTP 221
True Wisdom only comes from Pain.
Master Welder
It's not likely someone is just going to have one sitting around collecting dust and Lincoln may not sell it separately.
WeldingWeb Artisan
I didn’t see the other thread. I only saw this one. Ok. Sorry.Just a thought for Joker11,
In the other thread "The MAN" mentioned rebuilding it. try to keep up, OK?
Posting Permissions
