Results 1 to 3 of 3

Thread: New rig

  1. #1
    Join Date
    Dec 2005
    Location
    Sacramento
    Posts
    85
    Post Thanks / Like

    New rig

    Well I finally pulled the trigger and picked up a new Miller Dynasty 200DX. Wow what a bucket of fun! I have already burned up about half of my 80lb argon bottle just practicing.
    I thought that I would post a couple of pics of my new fun.

    This is 1/8" channel with a 1/8 strip welded in. Settings were.100amps, 1/16" red tungsten, waveshape 75%, frequency 100htz.


    Balck soot is where I migged it together a while back.


    I think I am on the right track for only a couple hours of TIG welding.

    Thoughts?
    "If you live in Sacramento you have seen my work."

  2. #2
    Join Date
    Mar 2006
    Location
    Troy, NY
    Posts
    473
    Post Thanks / Like

    Re: New rig

    Weld looks good, but you need to add more filler. You have undercut on the top of the weld. But other then that, for just starting to Tig. Looks great.

  3. #3
    Join Date
    Nov 2008
    Posts
    5
    Post Thanks / Like

    Re: New rig

    was that tig or mig not bad. try using miller syncrowave their really good with tig alum.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,628,127,983.87285 seconds with 11 queries