Weld-O-Rama

[Trucker2Welder]

This is cool! Need to do something like this on the east coast, and/or South eastern US... I'm in upstate South Carolina.
Bob

[JD955SC]

This is cool! Need to do something like this on the east coast, and/or South eastern US... I'm in upstate South Carolina.
Bob

I will see if I can get on setup for those of us in this area but we will have to find a decent shop space

[jlames]

I noticed that so far, only Miller guys are signed up. Come on my Lincoln brothers. Gimme some love here!!! But I am hoping someone brings a Miller along. I'd love to see what it does!

[SuperArc]

I know. I had a plane there for about 10 years. Just sold it last year. Fuel just got tooooo expensive. You a pilot too? If so, I'd be glad to come down and pick you up. 24 or 6. Your choice! Or rather, the wind's choice, right? From you it's a straight shot through Joshua control to Fox tower.

I tend to beat the wind into submission. I don't need no stinkn runways. Lol. "...straight in to the ramp, landing will be at pilot's own risk." I'm there regularly.

Thank you so much for the invite, but I work weekends.

[shovelon]

Ed(Brocolli) says he will bring his Miller Passport, which I would love to give a try. I will bring my Miller Dynasty200DX for anyone that wishes to experience nirvana.

So we can have a mig and tig clinic as well? I will give a demo at "Beer Can" welding as well on my Dynasty. I will bring a full box of cans for anyone else to try.

[grumpycricket]

D*** it!!! Too far away!

[killdozerd11]

Let me know if you want me to bring the TB 302 with the 12RC
have to take it out of the rusty truck and put it in the tundra

[ZTFab]

I noticed that so far, only Miller guys are signed up. Come on my Lincoln brothers. Gimme some love here!!! But I am hoping someone brings a Miller along. I'd love to see what it does!

I only use Lincoln MIG welders.

...but my TIG is Miller.

[weldermike]

Id say we should have one in Ny, but we would probably just get drunk and wind up in a strip club.

[zapster]

And I took the liberty to move it here where it belongs for the most bang for your buck.

Not that it cost anything but none the less.......


...zap!

[soutthpaw]

If ya do one in the first 3 weeks of June u can count me in. Space will be limited in what I can bring out. Will be limited to prob a Goweld and/or a Longevity machine or 2 ....

[jlames]

Wookie's on his way as well!

[jlames]

OK. All your equipment is welcome. I'll put another 50amp in so we can have a TIG and a MIG going. It might be crowded but it'll be a great learning experience for everyone. If you haven't PMd me your email, please do that. I need to have enough food and beverage on hand so I need to know how many are attending.

[bp626indamix]

Let me know if you want me to bring the TB 302 with the 12RC
have to take it out of the rusty truck and put it in the tundra

If I end up going, ill take my ranger 305g. Aarrgh! Battle of the biguns! Lol
Oh yeah I have a lift arc setup for my ranger too. In case anybody wants to try it. Used for field work.

[jlames]

Oxy Moron just joined the group coming up. It's gettin' good. This'll be fun.

[Broccoli1]

I'll bring the Passportplus fer sure and I have the spoolgun for it so we can run some Al wire with it also.

I'll bring the Argon. Just need to round up some scrap Al.

[Joker11]

I am in. Wife approved the gas money, the use of the truck and being out of state on my Birthday (9th) and Mother's Day (12). I am going to hit DisneyLand with my baby girl while I am out there! Taking a week off of work to make it out!

I am a diehard Lincoln fan, so don't let those miller guys get all uppity on you jlames!

At least you are able to get guys to show up! Nobody was up for Las Vegas! lol

I have some cool pipes that are perfect for making a welding table out of. They even have floor flanges on the bottoms. I will bring them out and we can do a drawing to see who gets them. Then have them build a table (at a later date and at their own leisiure) and post up the pictures for us! Or they could make 4 grinder stands!!!

I have extras.

Plus!!! if anyone is interested, I have a chunk of railroad rail that is just itching to become a small anvil project!!!

Man, a drawing would be cool just so I can see what people do with the stuff. I am going to look for a cool surprise item now!

The only hitch is that I am waiting for my boss to approve the time off. I am the only guy on the west half of Arizona and I am on call 24/7. So if he can't manage without me, I can't go.

[weldermike]

I am in. Wife approved the gas money, the use of the truck and being out of state on my Birthday (9th) and Mother's Day (12). I am going to hit DisneyLand with my baby girl while I am out there! Taking a week off of work to make it out!

I am a diehard Lincoln fan, so don't let those miller guys get all uppity on you jlames!

At least you are able to get guys to show up! Nobody was up for Las Vegas! lol

I have some cool pipes that are perfect for making a welding table out of. They even have floor flanges on the bottoms. I will bring them out and we can do a drawing to see who gets them. Then have them build a table (at a later date and at their own leisiure) and post up the pictures for us! Or they could make 4 grinder stands!!!

I have extras.

Plus!!! if anyone is interested, I have a chunk of railroad rail that is just itching to become a small anvil project!!!

Man, a drawing would be cool just so I can see what people do with the stuff. I am going to look for a cool surprise item now!

The only hitch is that I am waiting for my boss to approve the time off. I am the only guy on the west half of Arizona and I am on call 24/7. So if he can't manage without me, I can't go.

Call in sick with a eye problem. When he asks whats wrong tell him you can't see yourself coming to work that week!

[WeldorWes]

Cool looks we are going to get a good turn out

[shovelon]

Awesome guys!

Looking forward to it. I am bringing my Dynasty200, some rods, and some argon. I can do with 115 volts. I got some hoods too, but they are fixed shade.

I will put together the soda can station for anyone that wants to kill some.

[Joker11]

I have tried to do the soda can. I assume that I had bad cans. Because I couldn't do it. I certainly can't be the problem, right?

ZTFab,
Don't feel bad about your Miller Tig. Someday when you get GOOD at what you do, you will probably want to upgrade!!!
LOL. Just kidding, you know I love you like a redheaded stepchild.

Man, I am stoked! I can't wait.

[zapster]

You guys had better post pics or else it's the penalty box for "Unsportsmanlike conduct"

...zap!

[jlames]

OK. I'm thinking I gotta put in another 50 amp outlet in, even if its temporary. My neighbor, the welder is excited too. Always great to get like-kinded minds together. Should be fun.

[jlames]

Nope. Staying with 2. No more room in the box.

[killdozerd11]

Wow going to be a good turnout

Hey joker i have been looking for 2- 4 foot pieces of rail for a weight on my disc ...you wouldn't have something like that kicking around
used to be able to get it around here but not anymore