Nice Job. Seems like you are ahead of the game with CAD stuff.
I used QCAD to draw the parts used in this and layered them to make sure everything would line up and work. I was designing a fab wheel similar to Off The Hook Design and Fabs BioHazard wheel. For revision 1.0 I am fairly happy. All parts were cut on a friends plasma table that doesn’t cut the nicest.
I’ve also designed some bevelling band crawler tracks with rare earth magnets to cut flat plate with my crawler as well as jam a MIG gun in it for a poor mans automatic mig welder.
Sent from my iPhone using Tapatalk
Nice Job. Seems like you are ahead of the game with CAD stuff.
www.tjsperformance.com
Dynasty 300 DX
HTP 240
HTP Microcut 380
Hyperthem 85
JD2 Hyd Bender and HF Hyd Ring Roller all in one =(Frankenbender)
Bpt. Mill/DRO
4' x 8' CNC Plasma Table
Instagram: tjsperformance
YT: TJS Welding and Fabrication
Ok. Very excited. This was/is my first real paying job in where I used my CNC plasma cutter. Making a winch doubler plate that will reside under and enclosed trailer. I will make bracing as well to tie into the trailer crossmembers. He will be pulling his cars up into the trailer. Here is the cutting vid. I have 2 other vids on this as well that include the drawing and sheetcam post processing. I am a newbie on this so go easy on me.
www.tjsperformance.com
Dynasty 300 DX
HTP 240
HTP Microcut 380
Hyperthem 85
JD2 Hyd Bender and HF Hyd Ring Roller all in one =(Frankenbender)
Bpt. Mill/DRO
4' x 8' CNC Plasma Table
Instagram: tjsperformance
YT: TJS Welding and Fabrication
I also want to thank @Acourtjester for helping me out with Inkscape. I know it is trivial but just like learning anything else you don't know what you don't know.
www.tjsperformance.com
Dynasty 300 DX
HTP 240
HTP Microcut 380
Hyperthem 85
JD2 Hyd Bender and HF Hyd Ring Roller all in one =(Frankenbender)
Bpt. Mill/DRO
4' x 8' CNC Plasma Table
Instagram: tjsperformance
YT: TJS Welding and Fabrication
Hippie method.....