Results 1 to 8 of 8

Thread: Foot pedal wanted

  1. #1
    Join Date
    Sep 2012
    Location
    Wheatland, Wyoming
    Posts
    653
    Post Thanks / Like

    Foot pedal wanted

    I need a foot pedal for a Thermal Arc 130S. It is a 8 pin connector. I have a RFCS-14 Miller pedal for trade if someone is interested in a trade.
    Chris
    Auction Addict

  2. #2
    Join Date
    Sep 2012
    Location
    Wheatland, Wyoming
    Posts
    653
    Post Thanks / Like

    Re: Foot pedal wanted

    Anyone interested?
    Chris
    Auction Addict

  3. #3
    Join Date
    Oct 2011
    Location
    Montana USA
    Posts
    22
    Post Thanks / Like

    Re: Foot pedal wanted


  4. #4
    Join Date
    Oct 2011
    Location
    Montana USA
    Posts
    22
    Post Thanks / Like

    Re: Foot pedal wanted

    Sorry got the wrong stuff.

  5. #5
    Join Date
    Apr 2010
    Location
    The Peoples Republic of Kalifornia
    Posts
    3,239
    Post Thanks / Like

    Re: Foot pedal wanted

    Here is the good stuff
    http://ssccontrols.com/
    Backed my CATMA over your CARMA oops clusmy me

    What would SATAN do ??


    Miller Trailblazer 302 AirPak
    Miller Digital Elite
    Optrel Welding Hat
    Arcair K4000
    Suitcase 12RC / 12 VS
    Hypertherm PM-45
    Rage 3 saw
    Rusty old Truck

  6. #6
    Join Date
    Jan 2005
    Posts
    4,473
    Post Thanks / Like

    Re: Foot pedal wanted

    Quote Originally Posted by milomilo View Post
    I need a foot pedal for a Thermal Arc 130S. It is a 8 pin connector. I have a RFCS-14 Miller pedal for trade if someone is interested in a trade.

    I could see the 1000 ohm pot in the Miller control working fine. I have Thermal-arc (more then one) that I use a SSC controls 14 pin Miller pedal on. I was going to use it with my 186,(5K pot) but my factory pedal is working well now. Anyway I would put a 8 pin plug on the 14 pin miller ft.control or make a adapter to do so. Thermal use to sell a adapter cable to do so. Not anymore though.
    Esab/Lorch ET-220i
    Esab 160i caddy
    Esab CV353
    Thermal LM-200/ Lincoln feeders
    Thermal 60i- 3phase
    Pak 50
    Thermal 35C
    Thermal 15c
    INE 1500
    Klutch 220i
    Blue Demon/140 msi/90sti

  7. #7
    Join Date
    Sep 2012
    Location
    Wheatland, Wyoming
    Posts
    653
    Post Thanks / Like

    Re: Foot pedal wanted

    If I knew how to wire the Miller and if I had the 8 pin connector to plug into the Thermal Arc, I would do that. But alas, I have no wiring diagram for either one. Just hoping someone has a Thermal Arc pedal and wants a Miller pedal.
    Chris
    Auction Addict

  8. #8
    Join Date
    Jan 2005
    Posts
    4,473
    Post Thanks / Like

    Re: Foot pedal wanted

    Quote Originally Posted by milomilo View Post
    If I knew how to wire the Miller and if I had the 8 pin connector to plug into the Thermal Arc, I would do that. But alas, I have no wiring diagram for either one. Just hoping someone has a Thermal Arc pedal and wants a Miller pedal.

    Miller remote 14 receptacle pin assignments

    Miller Remote 14 receptacle - pin assignments

    Common for all miller models which have a 14 pin receptacle

    A - 24 volts AC

    B - Contact closure to A completes 24 volts ac contactor control circuit

    I - 115 volts ac.

    J - contact closure to I completes 115 volts ac contactor control circuit

    C - Output to remote control: 0 to + 10 volts dc, + 10 volts dc in mig mode

    D - Remote control circuit common.

    E - 0 to 10 volts dc input command signal from remote control.

    M- CC/CV select (CC/CV models)

    F - Current feedback: +1 volt dc per 10 output receptacle volts

    H - Voltage feedback: +1 volt dc per 10 output receptacle volts

    G - Circuit common for 24 and 115 volts ac circuits

    K - chassis common

    So if you want to make a foot pedal for Tig, use c,d,e for current control.
    Use a 1000 ohm pot. Use A and B if you want a contactor.

    It here for the 8-pin
    http://victortechnologies.com/IM_Upl...316_0_2620.pdf
    Esab/Lorch ET-220i
    Esab 160i caddy
    Esab CV353
    Thermal LM-200/ Lincoln feeders
    Thermal 60i- 3phase
    Pak 50
    Thermal 35C
    Thermal 15c
    INE 1500
    Klutch 220i
    Blue Demon/140 msi/90sti

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,664,831,379.75902 seconds with 13 queries