Results 1 to 5 of 5

Thread: Tool stand

  1. #1
    Join Date
    Nov 2012
    Location
    Wasilla, Alaska
    Posts
    556
    Post Thanks / Like

    Tool stand

    Ok, next project is making some 36" tall tool stands for some leather working power tools like this -



    I was thinking a three leg design to ease stability but a four leg setup would be easier to design.

    Thoughts, comments?
    Miller Dynasty 200DX
    Miller 252
    Miller 250x
    Miller Syncrowave 250
    Miller AEAD200 Legend
    Miller 375 Xtreme plasma
    Lincoln WeldPak 100
    Victor O/A

  2. #2
    Join Date
    Nov 2012
    Location
    Wasilla, Alaska
    Posts
    556
    Post Thanks / Like

    Re: Tool stand

    Well, went with a basic three leg and it appears to be plenty stable for what it needs to do.
    Miller Dynasty 200DX
    Miller 252
    Miller 250x
    Miller Syncrowave 250
    Miller AEAD200 Legend
    Miller 375 Xtreme plasma
    Lincoln WeldPak 100
    Victor O/A

  3. #3
    Join Date
    Jun 2012
    Posts
    600
    Post Thanks / Like

    Re: Tool stand

    That'a fine build. Looks sturdy. Well done.
    PlasmaCam CNC cutter
    Lathe and Band Saw
    Clamps

  4. #4
    Join Date
    Jun 2012
    Posts
    422
    Post Thanks / Like

    Re: Tool stand

    Great looking and well built tool stand. It looks balance with your three legged design. Great job!
    Last edited by Ironman50; 01-15-2014 at 04:33 PM.

  5. #5
    Join Date
    Dec 2013
    Location
    Canada
    Posts
    798
    Post Thanks / Like

    Re: Tool stand

    Really cool.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,627,397,069.73499 seconds with 13 queries