I like it. I saw something similar at a home and garden show. I took a picture I too want to make some for people.

 

really cool

 

Looks good. I copied the same design. Thanks to whoever did actually post the original pictures of this thing. Here's a picture of my interpretation of it, I ended up making half a dozen of them for Christmas presents last year.

 

Very nice clean and functional design for storage of single bottle. Would be interesting to see that done in a multi bottle design.

Say Larry was that done using copper or given a copper finish?

 

that looks like rustoleum's hammered finish

 

It is easy to see you all are beer drinkers! Wine should be stored with the cork wet. Of course for display purposes this works great!

 

Yep, you are right about that. If you notice the wine bottle in my rack actually has a screw on cap.............:laugh::laugh:

And yes again that is Rustoleum hammered copper paint.

 

The fancy wines should be 'decanted'. How Foo-foo is that?

Add a screw to the bottom-end of the holder to raise that end ever-so-slightly, just enough for the wine to pour slowly into the glass. The theory is that any dregs will remain in the bottle when the wine is taken slowly from the top.

Or,, just use the boxed-wine straight from the fridge like I do.

 

Its John Deere brand Gloss over Rustoleum primer

 

Here's an idea for a wine rack. It's a little more involved. Goes great in an italian decorated kitchen.

 

all look great i made a 6 bottle

 

very nice
Keep the pictures flowing. I want to make some for family and I'm makeing a ring roller.

 

very nice work, nice done.

by the way i made the "chain bottle holder" a few weeks ago for xmas pressents, here´s some pics of the first one i made, the ones i made afther this were better, after correct some angle issues, and silver paint, but dont have pics of those

 

That chain bottle holder is super-cool!!!
Are the few hanging links loose or did you weld them also.

I'm new at welding design. Did you make a jig for this or do it freehand? Start from the base or the neck?

Looks like I need to dig out some leftover chain, and empty a few 'test' bottles...

AzLar

 

yes, the few links hanging are not welded, so they hang naturally.

when i did this i made a little jig, but nothing welded, just a piece of pipe clamped with a
vise grip simulating the bottle´s neck, and another bigger piece for the circular shape of the base.

then i put the chain, arround the "supposed bottle neck" then arround the base, and clamp it in some places with more vice grips, and then when everyting was hangin, i start welding the links together.

i dont have pics of the "jig" but i will make some more bottle holders and i will take some pics.

 

I have to go to the Amish steel supply guy Monday to look for some non-coated chain. I love that. Plus I can use it in class when we talk about center of gravity (minus the wine bottle). I will have to find a similar bottle.

 

yep kommodore, I'm copying your design at some point for a mail box post, free hanging links and all. I saw this design for sale some where, did you sell alot of them???

 

most of them were xmas presents XD, but i sell two of the six i made, the other four were presents.

 

here's the link

http://www.needapresent.com/gifts/floating-wine-bottle-holder