Results 1 to 16 of 16

Thread: selling some tools I no longer need. Chicago burbs.

  1. #1
    Join Date
    Jan 2012
    Location
    Chicagoland
    Posts
    39
    Post Thanks / Like

    selling some tools I no longer need. Chicago burbs.

    I'm moving to a place where I won't be able to store half of the tools and equipment I've got in the garage at the house I've been renting. So I'm selling off the things that won't be moving into the spare bedroom at the town home.


    I have an old Snap-on 1/2 inch impact and a 2131qt Ingersoll 1/2 I'm parting with $75 each or $120 for both or obo





    My Hobart Handler 187 Mig welder, I have 2 2lb spools of .035 309L stainless, 1 2lb spool of .035 fluxcore some spare .035 tips and a Harbor freight auto darken helmet. I also have a welding cart I built a long time ago to hold my mig and tig you can have as well. If your serious feel free to come on by and lay some beads. I also have a small tank of AR/CO2 mix that I can include depending on price. I have a $160 deposit on the tank $650 obo (HTP Tig not included)




    I have this old school Delta Milwakee drill press it runs on 110v, won't die and was made just after WW2. the second pic is of the serial number if you want to research it. $200obo






    Smith oxy fuel Equipment $250obo
    sw-1 handle
    sc205 cutting attchment
    sw-205 oxy welding tip
    sw-203 oxy welding tip
    st-605 heating tip
    oxy/acyt regulators
    and 35 feet of new hose.





    THE stuff that needs some TLC

    The electric motor **** the bed on my compressor, Pump spins freely and I installed a new pressure switch a little while ago ( that was 50 shipped) also comes with regulator and 25ft spool of goodyear hose with hose reel
    I'd like $150obo 5hp 240volt 60 gallon






    12hp snapper riding mower 30" deck $50
    It would surge slightly while running and last year just before winter it stopped running. You can keep the engine going on starting fluid, and the battery is toast, I can use jump box to turn over motor if interested.




    Non tool related stuff

    $150
    I have a 6ft comfy sac in grey suede, doesn't smell just too big for the place I'm moving, this thing is awesome for watching movies, playing video games.
    Take a look at my sweet sac

    And a tool for the woman in your life....

    a Galyan's 3210 series Tracker treadmill $100 switch for incline stopped working so it is still on a slight incline. window lickers not included


    Hobart Handler 187,
    Craftsman drill press,
    Smith torch setup,
    Htp invertig221,
    Milwakee portaband saw w/Swagoffroad V3.0 table kit

  2. #2
    Join Date
    Nov 2009
    Location
    Hellinois
    Posts
    5,836
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    PM sent
    "Where's Stick man????????" - 7A749
    "SHHHHHH!! I sent him over to snag that MIC-4 while tbone wasn't looking!" - duaneb55
    "I have bought a few of Tbone's things unlike Stick-Man who helps himself" - TozziWelding
    "Stick-man"

  3. #3
    Join Date
    Feb 2009
    Location
    Chicago
    Posts
    6,231
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    What town are you in?
    Torchmate 2x2 CNC with Flashcut CNC controls
    Hypertherm Powermax45
    Esab ET220i
    Razorweld 195 Mig
    Razorweld 200ac/dc Tig
    Tormach 770, Tormach xstech
    Razorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer

  4. #4
    Join Date
    Jan 2012
    Location
    Chicagoland
    Posts
    39
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    I'm located in Westmont, IL 60559 forgot to add that...
    Hobart Handler 187,
    Craftsman drill press,
    Smith torch setup,
    Htp invertig221,
    Milwakee portaband saw w/Swagoffroad V3.0 table kit

  5. #5
    Join Date
    Jan 2012
    Location
    Chicagoland
    Posts
    39
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    PM replied Stick-man
    Hobart Handler 187,
    Craftsman drill press,
    Smith torch setup,
    Htp invertig221,
    Milwakee portaband saw w/Swagoffroad V3.0 table kit

  6. #6
    Join Date
    Jan 2012
    Location
    Chicagoland
    Posts
    39
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    Impact guns both pending

  7. #7
    Join Date
    Jan 2012
    Location
    Chicagoland
    Posts
    39
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    Smith setup sold.

  8. #8
    Join Date
    Jan 2012
    Location
    Chicagoland
    Posts
    39
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    Compressor, impacts, drill press, Hobart mig still up for grabs.

  9. #9
    Join Date
    Dec 2010
    Location
    Utah
    Posts
    2,071
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    If I wasnt 1000 miles away I would take that drill press in a heartbeat. (although Im not sure why. hahahaha)

  10. #10
    Join Date
    Jan 2012
    Location
    Chicagoland
    Posts
    39
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    Robert, I don't want to get rid of it...and if it doesn't sell I'll put it in the spare bedroom at our town home. I wanted to restore it and use it but I cant take it all with me so I'm attempting to lighten the moving load.

  11. #11
    Join Date
    Jan 2012
    Location
    Chicagoland
    Posts
    39
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    Treadmill gone and compressor is being picked up. I still have the impacts, drill press and hobart mig welder.

  12. #12
    Join Date
    Mar 2012
    Location
    New Philadelphia Ohio
    Posts
    521
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    I've got the same drill press. Lol picked mine up for $45 at a local storage unit auction. Works great.
    1973 Lincoln SA 200, Already replaced shunt coils, Idle board (SOLD)
    1984 Miller Dialarc 250HF, Miller water cooler, 250 AMP water cooled torch, you know the worx.

  13. #13
    Join Date
    Jul 2014
    Posts
    21
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    PM Sent
    Thank you to all of the members of the US Armed Forces!

  14. #14
    Join Date
    Jul 2014
    Posts
    21
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    PM Sent Again. This time to the right person.
    Thank you to all of the members of the US Armed Forces!

  15. #15
    Join Date
    Jan 2012
    Location
    Chicagoland
    Posts
    39
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    Only thing left is the drill press. Make an offer.

  16. #16
    Join Date
    Jan 2012
    Location
    Chicagoland
    Posts
    39
    Post Thanks / Like

    Re: selling some tools I no longer need. Chicago burbs.

    Everything is sold.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,638,794,131.25879 seconds with 13 queries