-
Re: Trailer fail pics

Originally Posted by
bigfoot
Just saw this on the news someone in western Wisconsin Just got caught twice in a week with duck tape covering the rusted out frame on his 14,000 pound trailer got put out of service twice

Sent from my SM-A515U1 using Tapatalk
A few years ago I got a call from one of the national trucking companies (middle of the night) and one of their (bright orange) trailers was stuck at a scale and needed a "smidge" of welding to proceed. I got there and the sliding tandem rails looked just like that. No hope of fixing that in the scale yard. Not sure where it went but it was more than I wanted that night.
-
Post Thanks / Like - 3 Likes, 0 Dislikes
-
Re: Trailer fail pics
How cheap can you go.
Dave

Originally Posted by
bigfoot
Just saw this on the news someone in western Wisconsin Just got caught twice in a week with duck tape covering the rusted out frame on his 14,000 pound trailer got put out of service twice

Sent from my SM-A515U1 using Tapatalk
-
Re: Trailer fail pics

Originally Posted by
smithdoor
How cheap can you go.
Dave
I know... everyone knows you use Gorilla tape and not duct tape for structural repairs...
The harder you fall, the higher you bounce...
250 amp Miller DialArc AC/DC Stick
F-225 amp Forney AC Stick
230 amp Sears AC Stick
Lincoln 180C MIG
Victor Medalist 350 O/A
Cut 50 Plasma
Les
-
Post Thanks / Like - 5 Likes, 0 Dislikes
-
-
Post Thanks / Like - 2 Likes, 0 Dislikes
-
Re: Trailer fail pics
The bad part…is that that ******* was risking other people’s lives. The trailer, if there was a failure, especially at freeway speed…could easily become a two ton projectile.
-
Post Thanks / Like - 3 Likes, 0 Dislikes
-
Re: Trailer fail pics

Originally Posted by
whtbaron
I know... everyone knows you use Gorilla tape and not duct tape for structural repairs...
It won't work for frames, but a favorite material for body work in rusted out vehicles is ice & water shield (bituthane).
An optimist is usually wrong, and when the unexpected happens is unprepared. A pessimist is usually right, when wrong, is delighted, and well prepared.
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Trailer fail pics
Just when you thought you have seen it all..........................
-
Post Thanks / Like - 2 Likes, 0 Dislikes
-
-
Re: Trailer fail pics
You might want to tighten that nut at the front end. Its lockwasher isn't fully compressed.
* Amico MIG-130A Flux, Dual Voltage. Truly portable!
* HF MIG-180 with all the mods. Heavy.
* Grizzly H8153 Stick/Tig 130/160.
* Wards PowrKraft AC-230. Stick & carbon arc.
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Trailer fail pics
Looks like it haul a 15,000 pound tractor trailer.
Down hill only
WEE WEE WEE.
Da

Originally Posted by
bfjou812
Just when you thought you have seen it all..........................

-
Re: Trailer fail pics
At least he didn't drill the gas tank!
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Trailer fail pics

Originally Posted by
arcflash
At least he didn't drill the gas tank!
Or weld to it.
* Amico MIG-130A Flux, Dual Voltage. Truly portable!
* HF MIG-180 with all the mods. Heavy.
* Grizzly H8153 Stick/Tig 130/160.
* Wards PowrKraft AC-230. Stick & carbon arc.
-
Re: Trailer fail pics

Originally Posted by
bfjou812
Just when you thought you have seen it all..........................

Yep.... but look at the factory tow hook welded on right beside it...
The harder you fall, the higher you bounce...
250 amp Miller DialArc AC/DC Stick
F-225 amp Forney AC Stick
230 amp Sears AC Stick
Lincoln 180C MIG
Victor Medalist 350 O/A
Cut 50 Plasma
Les
-
Re: Trailer fail pics
It could be a tie down hook for shipping on board a ship 🚢
Dave

Originally Posted by
whtbaron
Yep.... but look at the factory tow hook welded on right beside it...
-
Post Thanks / Like - 2 Likes, 0 Dislikes
-
Re: Trailer fail pics

Originally Posted by
California
You might want to tighten that nut at the front end. Its lockwasher isn't fully compressed.

I don't know, that tack weld should hold it.......................
-
Re: Trailer fail pics

Originally Posted by
smithdoor
It could be a tie down hook for shipping on board a ship
Dave
Oh for sure... that's why they are there.... but when they are nose first in a snowbank, that's all you have to pull from . Owner's Manuals do a really poor job of explaining you need to get stuck while going backwards so you can use the factory thread in tow hook at the front.
The harder you fall, the higher you bounce...
250 amp Miller DialArc AC/DC Stick
F-225 amp Forney AC Stick
230 amp Sears AC Stick
Lincoln 180C MIG
Victor Medalist 350 O/A
Cut 50 Plasma
Les
-
Re: Trailer fail pics
The manual problem just said get tow truck 🚚 .
My self a avoid that getting stuck. I had to use the army surplus shovel one to many times in rain. It is short folding that fits under seat. Not very good but works in a pinch.
Dave

Originally Posted by
whtbaron
Oh for sure... that's why they are there.... but when they are nose first in a snowbank, that's all you have to pull from . Owner's Manuals do a really poor job of explaining you need to get stuck while going backwards so you can use the factory thread in tow hook at the front.
-
-
Post Thanks / Like - 3 Likes, 0 Dislikes
-
Re: Trailer fail pics

Originally Posted by
bfjou812
I just died
Millermatic 200®️
Spoolmatic 1®️
Craftsman™️ 180 amp AC arc welder
PrimeWeld CT520D
3x4 CNC table
Razorweld 45
Victor™️ OXY/acetylene torch
-
Re: Trailer fail pics

Originally Posted by
bfjou812
When you lost your license due to a DUI but still want to go fishing.
Sent from my SM-G996U using Tapatalk
Millermatic 252 MIG
Miller Dynasty 200DX TIG
Miller Spectrum 625 Plasma
Altas 12x36 Metal Lathe
Bridgeport Milling Machine
www.psacustomcreations.com
-
Re: Trailer fail pics
No boat, but Seth & I got lunch in Rutland, pulled into one of 20 vacant stores on Main Street Rutland to eat it. A man in an electric wheelchair I presume to be towing all his possessions came lumbering up Center Street. He towed a trailer my Jeep would struggle with. I am amazed what Government dollars can do.
I grew up with Mark. He was a derelict by 10 YOA. His mother HATED him, so what, mine hated me.
Early thirties he was on his second wife, he was boss of a group of stoners, he low bid painting jobs for condos. None of his "employees" got paid, none of his creditors got paid, somehow he carried on. He had weed, his "employees" settled for an endless supply of weed. He floated for a number of years.
By his mid thirties, his second wife had divorced him, he was ordered by court to share in support of his children, but didn't.
Then, his fairy Godmother brought him MS! Most of us would be crushed by the diagnosis, Mark was not! He now had an absolute excuse.
He started two "non profit" corporations.
One was Silent Heat. Silent heat was a corporation providing firewood to paying customers & those unable to pay. Since poor people are protected by a great many laws of confidentiality, the corporation's books are also. Money could flow, IRS wasn't allowed to look. He solicited donations, sold wood, & I bet weed, but the money was off limits.
He formed another non profit corporation to promote marijuana. He solicited donations.
By his mid sixties MS has taken its toll. No more energetic Flim Flam Man, he's a ghost in an electric wheelchair. Drive into his yard, you see a fleet of free electric wheelchairs abandoned outside. I know the price tag of one; $28000. It seems he gets a new one each year, parks the old one with the rest of the fleet.
An optimist is usually wrong, and when the unexpected happens is unprepared. A pessimist is usually right, when wrong, is delighted, and well prepared.
-
Re: Trailer fail pics

Originally Posted by
Willie B
No boat, but Seth & I got lunch in Rutland, pulled into one of 20 vacant stores on Main Street Rutland to eat it. A man in an electric wheelchair I presume to be towing all his possessions came lumbering up Center Street. He towed a trailer my Jeep would struggle with. I am amazed what Government dollars can do.
I grew up with Mark. He was a derelict by 10 YOA. His mother HATED him, so what, mine hated me.
Early thirties he was on his second wife, he was boss of a group of stoners, he low bid painting jobs for condos. None of his "employees" got paid, none of his creditors got paid, somehow he carried on. He had weed, his "employees" settled for an endless supply of weed. He floated for a number of years.
By his mid thirties, his second wife had divorced him, he was ordered by court to share in support of his children, but didn't.
Then, his fairy Godmother brought him MS! Most of us would be crushed by the diagnosis, Mark was not! He now had an absolute excuse.
He started two "non profit" corporations.
One was Silent Heat. Silent heat was a corporation providing firewood to paying customers & those unable to pay. Since poor people are protected by a great many laws of confidentiality, the corporation's books are also. Money could flow, IRS wasn't allowed to look. He solicited donations, sold wood, & I bet weed, but the money was off limits.
He formed another non profit corporation to promote marijuana. He solicited donations.
By his mid sixties MS has taken its toll. No more energetic Flim Flam Man, he's a ghost in an electric wheelchair. Drive into his yard, you see a fleet of free electric wheelchairs abandoned outside. I know the price tag of one; $28000. It seems he gets a new one each year, parks the old one with the rest of the fleet.
you talk about someone that you have no idea what went on behind closed doors when you were growing up. also you have no idea what god had in mind for him. shame on you. we all are given the opportunity before birth but it how god wanted you to turn out and what luck you had with those opportunities.
if 2 people had all the same traits and both were trying for the same job, do you know which one would would probably be hired? the better looking has the better chance! look it up if you don't believe me.
lincoln 125sp
dayton 250 ac/dc
miller 211 w/spool gun
ahp 200 sx tig
lotos ltp5000d
kubota b3200 FEL BH
of course duramax diesel
-
Re: Trailer fail pics
Meh.... I'm pretty ugly and I've always had lots of work. Probably why I'm self employed though...
The harder you fall, the higher you bounce...
250 amp Miller DialArc AC/DC Stick
F-225 amp Forney AC Stick
230 amp Sears AC Stick
Lincoln 180C MIG
Victor Medalist 350 O/A
Cut 50 Plasma
Les
-
Post Thanks / Like - 3 Likes, 0 Dislikes
-
Re: Trailer fail pics

Originally Posted by
duramax-rob
you talk about someone that you have no idea what went on behind closed doors when you were growing up. also you have no idea what god had in mind for him. shame on you. we all are given the opportunity before birth but it how god wanted you to turn out and what luck you had with those opportunities.
if 2 people had all the same traits and both were trying for the same job, do you know which one would would probably be hired? the better looking has the better chance! look it up if you don't believe me.
Actually, I do have a very good idea what went on behind closed doors. His single mother was a NUT. She had two sons, doted on the older one abused the younger.
I know he enjoyed reasonably good health until somewhere in his 50s, but planned to fail. He was blessed with above average intelligence, but made MANY bad decisions. He never owned a home, but spent his life figuring a new angle to live rent free in someone else's house. Every house where the owner had died, he'd offer to live in it & renovate instead of rent. That never seemed to happen. I've heard a dozen schemes where he was going to be gifted a home, or take advantage of some government liquidation to get a house free or nearly so. He used donated non profit money to build a shanty on his aunt's land.
An optimist is usually wrong, and when the unexpected happens is unprepared. A pessimist is usually right, when wrong, is delighted, and well prepared.
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: Trailer fail pics
Seems to be a re occurring theme. Ya, its a shame when the poor or even some deadbeats Are the cause of all the worlds greatest problems,,, if it wasn't for him they could have bought another fancy paint job on a rocket to blow up some more dirt in the Mideast.
Last edited by Sberry; 05-24-2022 at 09:18 AM.
-
Post Thanks / Like - 1 Likes, 0 Dislikes