-
TIG time...
OK here is the deal....
Seeing as my sidekick Tozzi is AWOL I think I will be doing a solo act in the future...
With that out of the way...
What I would like to do is get members that have never been here a chance to learn/improve their TIG skills....
I would like to keep it down to 4 or 5 members so every one gets ample seat time so it's worth their while....
No date has been set yet..
For those that don't know the shop is located in North Attleboro, Mass...
Interested?
Let. me know.....
More information to follow....
...zap!
I am not completely insane..
Some parts are missing
Professional Driver on a closed course....
Do not attempt.
Just because I'm a dumbass don't mean that you can be too.
So DON'T try any of this **** l do at home.
-
-
Re: TIG time...
TIG time??
Will, "Mr Tig" be there?
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: TIG time...
Originally Posted by
ZTFab
TIG time??
Will, "Mr Tig" be there?
God I hope not....
...zap!
I am not completely insane..
Some parts are missing
Professional Driver on a closed course....
Do not attempt.
Just because I'm a dumbass don't mean that you can be too.
So DON'T try any of this **** l do at home.
-
Re: TIG time...
Originally Posted by
zapster
God I hope not....
...zap!
-
Re: TIG time...
Hey Zap, I see you are putting this out to new bees first and that is only right. I have been to you classes twice and have learned a lot. If you do not get the interest from new people, I would love to attend.
-
Re: TIG time...
Wondering what a flight out would cost....
-
Re: TIG time...
Don’t pay any attention to me
I’m just a hobbyist!
Carl
Dynasty 300
V350-Pro w/pulse
SG Spool gun
1937 IdealArc-300
PowerArc 200ST
3 SA-200s
Vantage 400
-
Re: TIG time...
I am not completely insane..
Some parts are missing
Professional Driver on a closed course....
Do not attempt.
Just because I'm a dumbass don't mean that you can be too.
So DON'T try any of this **** l do at home.
-
Re: TIG time...
Originally Posted by
ZTFab
TIG time??
Will, "Mr Tig" be there?
I just saw a video where he did an inside corner.....from the looks of the weld he is still new....
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
-
Re: TIG time...
Originally Posted by
zenon52
Hey Zap, I see you are putting this out to new bees first and that is only right. I have been to you classes twice and have learned a lot. If you do not get the interest from new people, I would love to attend.
We'll see what transpires...
...zap!
I am not completely insane..
Some parts are missing
Professional Driver on a closed course....
Do not attempt.
Just because I'm a dumbass don't mean that you can be too.
So DON'T try any of this **** l do at home.
-
Re: TIG time...
Originally Posted by
CEP
Violence is not allowed.
Although some people would benefit from it...
...zap!
Last edited by zapster; 04-08-2014 at 03:17 PM.
I am not completely insane..
Some parts are missing
Professional Driver on a closed course....
Do not attempt.
Just because I'm a dumbass don't mean that you can be too.
So DON'T try any of this **** l do at home.
-
Re: TIG time...
Here is the info that follows...
(It's MUCH easier to type on a real keyboard other than the one that's on the phone.even sideways..)
Anyway if you attend you will need...
Your own mask..
Glove(s)..
Open mind.
That's about it!
Did I mention this is all FREE!!!!!?
Going for MAYBE the second or third Saturday in MAY...
...zap!
I am not completely insane..
Some parts are missing
Professional Driver on a closed course....
Do not attempt.
Just because I'm a dumbass don't mean that you can be too.
So DON'T try any of this **** l do at home.
-
Re: TIG time...
No word from Tozzi zap? Is he out of town on a job or something?
I hate being bi-polar it's awsome
My Heroes Have Always Been Cowboys
-
Re: TIG time...
Originally Posted by
weldermike
No word from Tozzi zap? Is he out of town on a job or something?
I kinda know what's going on but I will keep this to myself at the present time...
...zap!
I am not completely insane..
Some parts are missing
Professional Driver on a closed course....
Do not attempt.
Just because I'm a dumbass don't mean that you can be too.
So DON'T try any of this **** l do at home.
-
Re: TIG time...
Originally Posted by
zapster
I kinda know what's going on but I will keep this to myself at the present time...
...zap!
I hope everything is OK with him! He is a real asset to this forum.
Don’t pay any attention to me
I’m just a hobbyist!
Carl
Dynasty 300
V350-Pro w/pulse
SG Spool gun
1937 IdealArc-300
PowerArc 200ST
3 SA-200s
Vantage 400
-
Re: TIG time...
Interested?? Hell yes!
Wish I wasn't so far away, I would REALLY like to go to that.
-
Re: TIG time...
Bring your show on the road and stop by my garage.
1973 Lincoln SA 200, Already replaced shunt coils, Idle board (SOLD)
1984 Miller Dialarc 250HF, Miller water cooler, 250 AMP water cooled torch, you know the worx.
-
Re: TIG time...
Originally Posted by
dallas_
Interested?? Hell yes!
Wish I wasn't so far away, I would REALLY like to go to that.
Unfortunately too far (2371 miles) for me as well.
But I would kill to have the opportunity for one-on-one instruction with Zapster (or ZTFab). Either one producing picture perfect welds that leave me shaking my head.
Originally Posted by
zapster
Violence is not allowed.
...zap!
Oops, just a figure of speech.
Damn.
Hobbyist - At what point is a "hobby" out-of-control?
-
Re: TIG time...
Hi Zapster,
I live on the North Shore and I am definitely interested!
Sent from my iPhone using Tapatalk
Aspiring Top-Notch Weldor
Looking for work/experience in Eastern Massachussetts
-
Re: TIG time...
Originally Posted by
akatz
Hi Zapster,
I live on the North Shore and I am definitely interested!
Sent from my iPhone using Tapatalk
1 Down.....
3 or 4 to go.....
...zap!
I am not completely insane..
Some parts are missing
Professional Driver on a closed course....
Do not attempt.
Just because I'm a dumbass don't mean that you can be too.
So DON'T try any of this **** l do at home.
-
Re: TIG time...
Two things:
Please update us on Tozzi when appropriate. When I was back in Boston in October I wanted to look him up, but I was too busy Leaf Peeping.
I would LOVE to sit down with you and learn what ever I could about TIGing. That being said, five hours in a jet plane (cattle car) is not going to happen. If JayLo was going to be there, topless, serving free drinks then maybe five hours jammed into a airliner might happen.
Maybe "For Hire" could put one on here in Washington.
Lincoln Precision TIG 185.
Flex-Loc 150 torch.
Super-Flex hose.
Lincoln MIG 180.
Victor Oxy/Act torch set.
DeWalt Bandsaw with SWAG stand
-
Re: TIG time...
I'm interested but work some weekends. Depending on the date, I'd love to be in.
-
Re: TIG time...
Maybe it's just me being a relative newbie, but I've got no idea where that easy chair is? If a short flight on the West Coast, I might be interested.
Ahhh, I should try "reading for comprehension". Not sure how I missed that, sorry. Anyway, with flights over $700 (from memory), I'm out...
-
Re: TIG time...
Depending on the date I would be interested
-
Re: TIG time...
As long as it is not before May 3rd, I am in. A mere 121 miles. I'll buy the pizza...
Miller Multimatic 255