I need your proudest pictures!

[ebaran]

Any pipe welders out there! Post your pics! Here's the latest installment of welding design galleries. http://weldingdesign.com/processes/p...g-around-globe I'd be happy to add some images to this one, if any of the welders here have some pipe welding pics!
P.S. I'll be creating a new one next week, so keep those proudest pics coming!

[ebaran]

Another installment of welders from weldingweb.com proudest pics:

http://weldingdesign.com/operations/...ld_images-9021

[AFFENDE]

This is me running an 8" branch off a 36" header as a vent for my local utilities board. I removed a 36" branch, full encirclement patch, and then tapped into the header with an 8" line.

This was probably around 3am as we had to work through the night when the water demand for the city was the lowest as this was a main feed line to the main treatment plant.

Welding is not always fun and this was one of those times ... soaking wet under a pipe (had to be pushed in and dragged out) and getting burned up ... Still one of my favorites.

[Ainsworth]

Hello I just joined today I'm from Belize City I'm 39 years old and was wondering what are different avenues on getting over the U.S to do Stick Welding would love all advice

[Rustyweld2]

Hello I just joined today I'm from Belize City I'm 39 years old and was wondering what are different avenues on getting over the U.S to do Stick Welding would love all advice

You probably should post this in the job opportunities section. May have better luck. A lot of shops have gotten away from stick. A lot went with the various types of wire welding, in my area anyway. Good luck.

[LeonelHayward]

Hello I just joined today