Page 108 of 110 FirstFirst ... 85898106107108109110 LastLast
Results 2,676 to 2,700 of 2738

Thread: Blacksmithing tools

  1. #2676
    Join Date
    May 2014
    Location
    Manitoba Canada
    Posts
    5,239
    Post Thanks / Like

    Re: Blacksmithing tools

    Doesn't appear to have been any lack of talent in the design of that stand...
    250 amp Miller DialArc AC/DC Stick
    F-225 amp Forney AC Stick
    230 amp Sears AC Stick
    Lincoln 180C MIG
    Victor Medalist 350 O/A
    Cut 50 Plasma
    Les

  2. Likes VaughnT liked this post
  3. #2677
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Blacksmithing tools

    Quote Originally Posted by Shootr View Post
    ...wishing I had something hanging out in space a little to get a better angle and/or induce a bit of curvature.
    This is why should buy one of everything. No more of that silly talk about "need"ing a tool. See it, buy it. Stick it somewhere and someday it'll come in handy. If you talk with your wife, maybe she'll let you use the living room wall to create something like a tool display, almost like a museum, so you can store all the neat rusty iron that you run across. I hear wives don't mind that kind of thing.

    If you want a horn on your anvil, make it happen. Better to have it and not need it than need it and not have it. And make yourself a cone mandrel while you're at it. Cones are handy and you need a lot of different sizes.

  4. Likes Shootr, Roert42 liked this post
  5. #2678
    Join Date
    Dec 2018
    Location
    Southern California
    Posts
    939
    Post Thanks / Like

    Re: Blacksmithing tools

    Anyone have any experience using a Stainless steel (not sure of the exact alloy, nothing exotic they're just local metal supplier drops) for a bench block?

    Any reasons NOT to use stainless over mild steel?

    Would AR type steel be better or even suitable?

    I don't have an anvil, and buying one really is not in the works (anvils/vises are ridiculously expensive here in the land of almond milk and organic honey). For the small amount of "smithing" I do, I use mild steel bench blocks and wonder if a stainless or AR type bench block would be better.

    If all else is in vain I might just add hard face to my current bench blocks, but that is time and relatively (to the cost of the project) expensive.

    Thanks guys!

  6. Likes VaughnT liked this post
  7. #2679
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Blacksmithing tools

    Quote Originally Posted by SlowBlues View Post
    ...using a Stainless steel... for a bench block?

    If all else is in vain I might just add hard face to my current bench blocks, but that is time and relatively (to the cost of the project) expensive.
    Stainless steel is fine. The surface might lose its stainless quality because of the heat you're putting into it, but that's just cosmetic.

    Hard-facing is 100% good-to-go. It's actually how old worn out anvils are repaired and brought back to like-new condition. The Gunter Method of Anvil Repair has been used for thousands of anvils, and there's a guy in Nova Scotia who's made quite a name for himself on facebook and Instagram. Folks love seeing the before-n-after photos of the anvils he's saved.

    Grindstone - 214lb Mousehole

    Before:


    After:


  8. Likes Shootr liked this post
  9. #2680
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Blacksmithing tools

    Lots of progress pics on Grindstone's page, and always a joy to browse through.

    https://www.facebook.com/250.grindst...rnal&tab=album

    240lb Mousehole....





    He'd definitely make a good American with all that Can Do Attitude he's got going on!

  10. Likes Shootr liked this post
  11. #2681
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Blacksmithing tools

    Quote Originally Posted by SlowBlues View Post
    Would AR type steel be better or even suitable? I use mild steel bench blocks and wonder if a stainless or AR type bench block would be better.
    In the olden days, the best smiths in the world would have killed to have an anvil made from our mild steel, so don't fret it if that's all you have. The critical component is the mass you have under the hammer. To many people think that a big slab of steel makes a great anvil, but they would be wrong. A 12x12x3 chunk of steel laid flat is about as useless as teats on a boar hog. That same chunk turned on edge, though, so you have a 3x12 face and 12" of mass under where the hammer strikes.... well, that's a horse of a different color.

    Try it and you'll immediately see the difference.

    Of course, what the anvil is setting on also makes a difference. Benches are, by design, pretty flimsy. There's always some give.

    My bench has a solid steel top that 1-1/4" thick, and the legs are 4x4x1/4" angle iron. You'd think this would be stout, especially since the whole thing weighs over a 1000#.

    My Fisher anvil is only 300#, and it's sitting on a stand that weighs 150#. The difference in performance between the anvil and the big ol' bench is night and day. Even though my bench is far bigger, heavier and just generally looks awesome, the lighter anvil out performs it every time because there's no bend to the top when I'm hammering. The anvil's mass is all directly under the impact zone of the hammer.

    A block of mild steel will get you through a lot of work if you set it up to be effective. Plus, it just looks better, like it's a tool to be used seriously and not just some chunk of iron sitting on the bench!

    Throw in a little hard-facing rod and you'll be golden!



    You can even weld up a super-sexy design that's sure to make the whole family overjoyed for generations to come. It really is too bad that nobody makes anvils with style and grace anymore.




  12. Likes Lis2323, Shootr, Roert42 liked this post
  13. #2682
    Join Date
    Aug 2014
    Location
    B.C. Canada
    Posts
    5,566
    Post Thanks / Like

    Re: Blacksmithing tools

    Quote Originally Posted by VaughnT View Post
    Lots of progress pics on Grindstone's page, and always a joy to browse through.


    He'd definitely make a good American with all that Can Do Attitude he's got going on!

    Around here we call that a normal “working guy”. Must be the beer. Whtbaron and others will back me up…..


    Sent from my iPad using Tapatalk
    :

  14. Likes VaughnT liked this post
  15. #2683
    Join Date
    May 2020
    Location
    Arizona
    Posts
    871
    Post Thanks / Like

    Re: Blacksmithing tools

    Quote Originally Posted by VaughnT View Post
    This is why should buy one of everything. No more of that silly talk about "need"ing a tool. See it, buy it. Stick it somewhere and someday it'll come in handy. If you talk with your wife, maybe she'll let you use the living room wall to create something like a tool display, almost like a museum, so you can store all the neat rusty iron that you run across. I hear wives don't mind that kind of thing.

    If you want a horn on your anvil, make it happen. Better to have it and not need it than need it and not have it. And make yourself a cone mandrel while you're at it. Cones are handy and you need a lot of different sizes.
    I had a sign that read like this in my Snap-On truck...the wives were not amused. They did like the "Got Tools" thong underwear we had made up for them for Xmas though.

    Name:  FuembLXQARrTf_STAcfENjxO1nUFhna8miP5hK5rYCA.jpg
Views: 142
Size:  36.3 KB

    Living room is too far to walk. I subscribe to the "ask for forgiveness, not permission" mantra when it comes to my purchases. I'll figure out the horn eventually - probably get the one from Holland you linked to if nothing pops up here.
    Yeswelder MIG-205DS
    (3) Angle Grinders at the Ready
    Just a hobbyist trying to improve

  16. Likes VaughnT, whtbaron liked this post
  17. #2684
    Join Date
    Aug 2012
    Location
    AR
    Posts
    2,104
    Post Thanks / Like

    Re: Blacksmithing tools

    Quote Originally Posted by VaughnT View Post
    Lots of progress pics on Grindstone's page, and always a joy to browse through.

    https://www.facebook.com/250.grindst...rnal&tab=album

    240lb Mousehole....
    Wow! I checked out his facebook and webpages. That guy does some fantastic restorations. He has breathed new life into a lot of old Mousehole anvils. (LOL, I almost wrote "breathed new life into a lot of old Mouseholes", but that would NOT have gone over very well.....!!!)

  18. Likes Lis2323, VaughnT, whtbaron liked this post
  19. #2685
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Blacksmithing tools

    Grindstone is pretty dang awesome. And he's a great guy to shoot the bull with. Very knowledgeable and helpful every time I've run into him. Takes a mean picture, too!

    I can't wait to see what the next anvil comes out like. It's really cool to see him fix up something that you'd think was beyond saving.

  20. #2686
    Join Date
    May 2014
    Location
    Manitoba Canada
    Posts
    5,239
    Post Thanks / Like

    Re: Blacksmithing tools

    Quote Originally Posted by Lis2323 View Post
    Around here we call that a normal “working guy”. Must be the beer. Whtbaron and others will back me up…..


    Sent from my iPad using Tapatalk
    Uhhh.....yea....sure. Call me lazy, but I would have cut that mouse's tail off square. He does do great work though.
    250 amp Miller DialArc AC/DC Stick
    F-225 amp Forney AC Stick
    230 amp Sears AC Stick
    Lincoln 180C MIG
    Victor Medalist 350 O/A
    Cut 50 Plasma
    Les

  21. #2687
    Join Date
    Dec 2018
    Location
    Southern California
    Posts
    939
    Post Thanks / Like

    Re: Blacksmithing tools

    Thanks to the insight and information everyone, as always you guys not only come through with information but with inspiration for a few new projects and improvements. This forum is truly a gem.

    Fortunately my bench blocks are all very tall, cylinder and block shaped.

    I don't have them on a stump type SOLID stand though, I'll remedy that and go with the hardfacing.

    Hell, those "super sexy design" anvils have me thinking about adding a horn and/or heel to some of them. It's easy to forget that function should always trump form when looking at those gorgeous restored anvils. That is some beautiful work - and I love the idea of those anvils seeing another 50+ years of work.

    VaughnT - always a wealth of useful information. Grindstone does some very inspirational work!

  22. Likes VaughnT liked this post
  23. #2688
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Blacksmithing tools

    Before:





    Grindstone - "Keeping that interpass temp up. most people think that you have to limit your arc time to keep the face from getting too hot. Unless your anvil is 100lb or less this is not the case. I had to reheat this anvil a total of 3 times plus the post welding heat , to keep the interpass temp up at 400 degrees."

    During:



    After:



    If you know how to weld, there's no anvil you can't save. It's just a matter of time and money!

  24. Likes whtbaron liked this post
  25. #2689
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    2,991
    Post Thanks / Like

    Re: Blacksmithing tools

    A little bird told me about a 12 Ton forging press for sale on Instagram. It is from Coal Iron Works. The seller was only a little over an hour away. I combined one relatively quick trip to the seller with dropping off an art piece.

    Now I can easily squish hot metal.



    Sent from my SM-G996U using Tapatalk
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 625 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  26. Likes VaughnT, Shootr, whtbaron, shortfuse liked this post
  27. #2690
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Blacksmithing tools

    Nice score! Can't wait to see what you squish first!

  28. Likes psacustomcreations liked this post
  29. #2691
    Join Date
    Aug 2014
    Location
    B.C. Canada
    Posts
    5,566
    Post Thanks / Like

    Re: Blacksmithing tools

    Ooh. Sooo jealous


    Sent from my iPad using Tapatalk
    :

  30. Likes VaughnT liked this post
  31. #2692
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    2,991
    Post Thanks / Like

    Re: Blacksmithing tools

    Quote Originally Posted by VaughnT View Post
    Nice score! Can't wait to see what you squish first!
    It is not too loud. I have it in my enclosed shop and while there is the usual whine of a hydraulic pump, I would not say it is that bad.
    I normally wear hearing protection when forging anyway so this is no big deal.

    Sent from my SM-G996U using Tapatalk
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 625 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  32. Likes VaughnT liked this post
  33. #2693
    Join Date
    May 2020
    Location
    Arizona
    Posts
    871
    Post Thanks / Like

    Re: Blacksmithing tools

    Quote Originally Posted by psacustomcreations View Post
    A little bird told me about a 12 Ton forging press for sale on Instagram. It is from Coal Iron Works. The seller was only a little over an hour away. I combined one relatively quick trip to the seller with dropping off an art piece.

    Now I can easily squish hot metal.



    Sent from my SM-G996U using Tapatalk
    Quote Originally Posted by Lis2323 View Post
    Ooh. Sooo jealous
    Me too! That's awesome!
    Yeswelder MIG-205DS
    (3) Angle Grinders at the Ready
    Just a hobbyist trying to improve

  34. Likes psacustomcreations liked this post
  35. #2694
    Join Date
    May 2014
    Location
    Manitoba Canada
    Posts
    5,239
    Post Thanks / Like

    Re: Blacksmithing tools

    I like it... any rating for blows/min when it's fast or slow?
    250 amp Miller DialArc AC/DC Stick
    F-225 amp Forney AC Stick
    230 amp Sears AC Stick
    Lincoln 180C MIG
    Victor Medalist 350 O/A
    Cut 50 Plasma
    Les

  36. #2695
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    2,991
    Post Thanks / Like

    Re: Blacksmithing tools

    Quote Originally Posted by whtbaron View Post
    I like it... any rating for blows/min when it's fast or slow?
    It is more of a slow squish. It takes about three seconds or so to move that distance. Once it presses on the metal it slows of course.

    Sent from my SM-G996U using Tapatalk
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 625 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  37. Likes whtbaron liked this post
  38. #2696
    Join Date
    Aug 2014
    Location
    B.C. Canada
    Posts
    5,566
    Post Thanks / Like

    Re: Blacksmithing tools

    Quote Originally Posted by whtbaron View Post
    I like it... any rating for blows/min when it's fast or slow?
    Quote Originally Posted by psacustomcreations View Post
    It is more of a slow squish. It takes about three seconds or so to move that distance.

    Sent from my SM-G996U using Tapatalk

    WTF???? Am I the only one reading this???!


    Sent from my iPhone using Tapatalk
    :

  39. #2697
    Join Date
    May 2014
    Location
    Manitoba Canada
    Posts
    5,239
    Post Thanks / Like

    Re: Blacksmithing tools

    LOL...what??? I'm used to seeing stuff like power hammers for sheet metal moreso than blacksmithing tools. The hammering process there is much faster... I was just curious... nothing nefarious to see here...
    250 amp Miller DialArc AC/DC Stick
    F-225 amp Forney AC Stick
    230 amp Sears AC Stick
    Lincoln 180C MIG
    Victor Medalist 350 O/A
    Cut 50 Plasma
    Les

  40. #2698
    Join Date
    Aug 2014
    Location
    B.C. Canada
    Posts
    5,566
    Post Thanks / Like

    Re: Blacksmithing tools

    Sorry. It was late. Perhaps I was reading too much into that ….


    Sent from my iPad using Tapatalk
    :

  41. Likes whtbaron liked this post
  42. #2699
    Join Date
    Aug 2014
    Location
    B.C. Canada
    Posts
    5,566
    Post Thanks / Like

    Re: Blacksmithing tools

    A really nice fellow and his son sent me these photos of their forge setup and current 3” belt grinder.

    I think the forge is a Mighty Forge with two doors for pass through heating.



    Their belt grinder is a King 3” which gets them by,





    but they will be upgrading to mine with a custom cart.

    These fellas are serious knife/swordsmiths and the father is a Hakido Master. . Definitely not to be messed with


    Sent from my iPad using Tapatalk
    :

  43. Likes psacustomcreations, whtbaron, Shootr liked this post
  44. #2700
    Join Date
    Sep 2013
    Posts
    1,648
    Post Thanks / Like

    Re: Blacksmithing tools

    Looks like a very nice set up.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,638,243,306.06858 seconds with 15 queries