Results 1 to 7 of 7

Thread: New Guy Here

  1. #1
    Join Date
    Sep 2010
    Location
    Green Bay, Wisconsin
    Posts
    12
    Post Thanks / Like

    New Guy Here

    Hi I'm Jake and I,ve been lurking for a while and decided to finally share what I do.
    I'm 22 and a tinner apprentice and the son of a welder (access to his shop)

    I do alot of window shopping at expensive art and furniture and all sorts of metal projects. If I like something I build it but most of my work is my own design. I did quite a bit of art up to about a year ago but now I've got too many projects to list in front of it. I try to squeak a few in here and there though.

    A couple pics of a clock I made from 1/4" ss rod and a couple pieces I made, one of my daughter's wagon.
    Hope you enjoy!
    Attached Images Attached Images      

  2. #2
    Join Date
    May 2006
    Location
    Eastern Washington
    Posts
    1,038
    Post Thanks / Like

    Re: New Guy Here

    Welcome,
    very cool clock.
    UA Local 598

  3. #3
    Join Date
    Sep 2010
    Location
    Green Bay, Wisconsin
    Posts
    12
    Post Thanks / Like

    Re: New Guy Here

    Yeah wish a would've kept that one. Ex-girlfriends got it.

  4. #4
    Join Date
    Sep 2010
    Location
    Green Bay, Wisconsin
    Posts
    12
    Post Thanks / Like

    Re: New Guy Here

    Couple more wall hanging and two bathroom racks.
    Attached Images Attached Images      

  5. #5
    Join Date
    Sep 2010
    Location
    Green Bay, Wisconsin
    Posts
    12
    Post Thanks / Like

    Re: New Guy Here

    Couple more
    Attached Images Attached Images     

  6. #6
    Join Date
    Feb 2009
    Location
    Calg, AB
    Posts
    719
    Post Thanks / Like

    Re: New Guy Here

    Hahahah.. What a cutie! Makayla sure looks happy in her wagon...

    Welcome to the board. It's a great place (as you likely know) with MANY talented people!

    Curious,... do you have any more photos of that 1ST bathroom rack that you built? I REALLY want to make one of those and could use some additonal photos/info...

    Cheers,

    /Jman..
    Miller Diversion 165
    120 amp Buzz Box
    Victor Oxy/Ace Oxy/LPG
    Smith "Little" Oxy/LPG
    Hypertherm Powermax 30
    Lot's of Misc. tools n' crap....

  7. #7
    Join Date
    Sep 2010
    Location
    Green Bay, Wisconsin
    Posts
    12
    Post Thanks / Like

    Re: New Guy Here

    Here are the specs and a few more pics.

    It's 24" wide.
    It stands 63" to the top of the top rack.
    The top three shelves are 12" apart from each other and th bottom shelf is 7" below that. leaving about 4" above the top of the tank.
    The legs start out 13" apart at the bottom and the front ones come back to 7" deep at the top.

    The bottom two racks are just sheet metal hems on all four sides.
    Dems. 7" x 24"

    The top two racks are 1/4" rod welded together
    Dems. 10" x 24"'

    The legs are about 5/8" od tubeing I had laying around.

    The scrolling I made myself with my modified HF scroll bender. knotched out to fit 1/4" rod
    Also you have to remove the flat spot where the two dies match up from the tool when you buy it.

    painted with Rustoleum hammer bronze
    Attached Images Attached Images     

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,638,352,531.20967 seconds with 14 queries