ReplyI sent another PM this morning. It wouldn't let me post the pictures so I'll do it here.Originally Posted by storeman
Excellent design! I'd like more info for sure.
Jerry
Master Welder
Looks good, I like the eyes on the owl. As for the birds being cold, they are too cold to hummmmmmmmmmmmmmmmmm.
Master Welder
I sent another PM this morning. It wouldn't let me post the pictures so I'll do it here.Excellent design! I'd like more info for sure.
Jerry
WeldingWeb Tradesman
Nice.... I like your wheel on the jack.I sent another PM this morning. It wouldn't let me post the pictures so I'll do it here.
Master Welder
'' Nice.... I like your wheel on the jack.''
Thanks, the old valve handle saves time and is really convenient too.
I sent Storeman a PM but couldn't post pictures so I had to post him there. The pics were in response to his questions .
WeldingWeb Foreman
Here are a couple of items that I have made recently,Obviously the tree was for Christmas and it turned out not too bad,
Lincoln SP-170 Mig
Hypertherm powermax 45
Lorch T220 AC/DC Tig
Butters FM 215 synergic Mig
Kemppi 180 adaptive mig
RULES ARE FOR THE OBEDIENCE OF FOOLS AND THE
GUIDANCE OF WISE MEN.
WeldingWeb Foreman
Recent cats. Made for a couple of my Granddaughters, Ground finish and clear varnish,
Lincoln SP-170 Mig
Hypertherm powermax 45
Lorch T220 AC/DC Tig
Butters FM 215 synergic Mig
Kemppi 180 adaptive mig
RULES ARE FOR THE OBEDIENCE OF FOOLS AND THE
GUIDANCE OF WISE MEN.
WeldingWeb Artisan
Thanks Bob.
Jerry
30+ yrs Army Infantry & Field Artillery, 25 yrs ago
Miller 350LX Tig Runner
TA 210, spool gun
Lincoln 250/250 IdealArc
ESAB PCM 500i Plasma
Kazoo 30" vert BS
Kazoo 9x16 horiz BS
Clausing 12x24 lathe
20T Air Press
WeldingWeb Tradesman
Meet """""The Donald"""" He don't give a Hoot !!!
WeldingWeb Tradesman
I finished this one today.
Master Welder
There sure is a variety of doing horseshoe letters. It's nice to see how others do it. When I do my horseshoe stuff I always save all the cut pieces. It's amazing what you can come up with to use them on. Nice job !!I finished this one today.
Master Welder
I had to replace the dish washer. Not wife, machine.I try to find uses for uses for almost anything I need to junk ( cheap ) I recycled the baskets. Set one up for horseshoe storage. These are all new and almost a 100 in it. This may work for you guys too.
Attachment 1338461
WeldingWeb Tradesman
Nice idea..
Master Welder
Thanks , I should've mentioned these are smaller shoes. The "000PL" , "00PL" , "DS000 ", and " 2PL. They are all Diamond brand.
WeldingWeb Artisan
That rack would still work for larger shoes, just clip off some of the prongs. Good idea, thanks for posting, I'll have to try it out.
WeldingWeb Tradesman
Meet Buster... he is ready to go to his new home on Monday..
Master Welder
I like the ball bearings eyes . I gotta find some of those.
WeldingWeb Foreman
On the theme of horseshoe letters, I made this a little while ago for a friend who runs a day community centre for impaired folks in our area, The centre is called Earthbeat, and i tried to copy the font that he uses on his paperwork.
Lincoln SP-170 Mig
Hypertherm powermax 45
Lorch T220 AC/DC Tig
Butters FM 215 synergic Mig
Kemppi 180 adaptive mig
RULES ARE FOR THE OBEDIENCE OF FOOLS AND THE
GUIDANCE OF WISE MEN.
Master Welder
Some of the Equine people have been asking about wine ( alcohol ) bottle / glass holders. I came up with a inside / outside setup. It has a horseshoe screw in base for a flat surface , inside / outside. Unscrew the horseshoe base and screw in the upright for in the ground support.
The inner bottom ring is 3" ID and the top is 4" ID.
WeldingWeb Journeyman
Very nice.
Master Welder
Made one of those Minion chacators for the neighbors little guy. Not sure if I should paint it or add a cowboy hat. I took pic with flat washer no curve and used a magnet to hold it temporarily .
Master Welder
Thanks, you must be talking about me .
WeldingWeb Tradesman
Very nice, I fabed this up a month or so for someone who never came by to pick it up..Some of the Equine people have been asking about wine ( alcohol ) bottle / glass holders. I came up with a inside / outside setup. It has a horseshoe screw in base for a flat surface , inside / outside. Unscrew the horseshoe base and screw in the upright for in the ground support.
The inner bottom ring is 3" ID and the top is 4" ID.
WeldingWeb Tradesman
Nice job..Made one of those Minion chacators for the neighbors little guy. Not sure if I should paint it or add a cowboy hat. I took pic with flat washer no curve and used a magnet to hold it temporarily .
WeldingWeb Tradesman
I have been working on this today. My oldest daughter sent me a pict of a cross to make for her. I told her I would give it a try. The blue cross is the pict. she sent me. The others are what I am making for her. The cross on the legs of my shoes did not come out as large as in the blue cross pict. I am not sure what I did wrong.
Master Welder
It looks fine. Everybody has different views. Personally, I would have the ends even at the bottom.
No matter how it's made someone will want it different. I just did that Minion post and have some that prefer it as is, others say paint it, and another put a hat on it.
So, I guess that means a variety needs to be made.
Posting Permissions
