custom fire ring project

[snoeproe]

Something I have been working on.
26" dia. 14" high
10g steel.
CNC plasma cut.
All welded construction using 1/8 7018-1
Aprox weight: 50lbs.

[Reebs]

Looks great. That is something else I have to add to my list of to-do projects.

[snoeproe]

I used high heat bbq paint (650f). It will be interesting to see if it holds up to the fire heat.
I don't have a metal roll thus the reason for a 6 sided ring.

[David Hillman]

You spelled "Cubs" wrong. Otherwise it's cool.

[MWalden]

Was it supposed to say "Cubs"? If so, that is a huge mistake. I could see "Cubbs", but Cobbs??

[mattlago]

Really nice. Only one problem. The side with the Vikings cut into it will probably flame up really hot, then retire, then make you think its comeing back, then retire, then come back..... and repeat.

[tigmusky]

Really nice. Only one problem. The side with the Vikings cut into it will probably flame up really hot, then retire, then make you think its comeing back, then retire, then come back..... and repeat.

that's funny I think the vikings side will lay down and wine about stadium.


nice job looks pretty cool

[Sample]

How has the high temp paint held up on these?

[lamename]

Nice job, and it doubles as a floor stencil.

[weldermike]

You spelled "Cubs" wrong. Otherwise it's cool.

I went back and checked.