Results 1 to 6 of 6

Thread: Brackets for 90 degree clamping ?? --

  1. #1
    Join Date
    Mar 2015
    Posts
    30
    Post Thanks / Like

    Brackets for 90 degree clamping ?? --

    Hi ...

    A while back someone posted where they had made some Brackets for 90 degree clamping out of 1/2" thick Alum. .... kind of like a stepped "L"

    Can someone help me find that post ?? I did search - but came up empty ..

    Thanks ...
    Last edited by GsWeld; 01-26-2016 at 08:26 AM. Reason: typo
    Welder want-to-be !

  2. #2
    Join Date
    Sep 2009
    Location
    Sedona, Arizona
    Posts
    1,016
    Post Thanks / Like

    Re: Brackets for 90 degree clamping ?? --

    fabricationjunky.com

    he is under @arpcustomz on instagram
    Last edited by Jimmy_pop; 01-26-2016 at 08:50 AM.

  3. #3
    Join Date
    Mar 2015
    Posts
    30
    Post Thanks / Like

    Re: Brackets for 90 degree clamping ?? --

    Hey Jimmy,

    Thanks for the info above ... they look very useful ... I will probably order a set .. as a new fabricator I need all the help I can get ....

    But ... what I was referring to was ones similar to below ...

    Name:  Alum-L.jpg
Views: 244
Size:  31.7 KB
    Welder want-to-be !

  4. #4
    Join Date
    Sep 2005
    Location
    Cave Creek AZ
    Posts
    3,298
    Post Thanks / Like

    Re: Brackets for 90 degree clamping ?? --

    As fabrication company, I can't see much use out of those stepped angles. You would be better off just making some 90* angles out of angle iron and plate similar to the fabrication junky angles. I also use the Bessey and strong hand 90*clamps quite a bit, they work well.

  5. #5
    Join Date
    Oct 2013
    Location
    Long Island, NY
    Posts
    2,204
    Post Thanks / Like

    Re: Brackets for 90 degree clamping ?? --

    Big fan of strong hand. I only own one of the 3 axis, I want to get at least 1 of the 2 axis but I would love to have 4. Theyre pricey especially for the 3 axis.
    www.FirehouseFabricators.com

    Zach

    Lincoln 210mp
    Lincoln SW200
    Hypertherm Powermax 45xp
    2x4 CNC Plasma Table.

  6. #6
    Join Date
    Mar 2011
    Location
    North Georgia
    Posts
    187
    Post Thanks / Like

    Re: Brackets for 90 degree clamping ?? --

    I just made my own with some strong angle iron. Picture a triangle, but with the very tip chopped off.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,632,257,614.28329 seconds with 14 queries