Snap on bluepoint plasma cutter help

[Michaeljp86]

A friend bought this plasma cutter and its isnt working. It looks like someone snipped something off the bottom corner of the circuit board. Does anyone know where to get a new circuit board or get a print of the board so I could replace whats missing? Im assuming it quit working and the last owner found a burnt resistor or something and cut it off to find a new one and gave up on fixing it. The machine is 115V and 25amp.

[brucer]

that plasma cutter is actually manufactured by Cebora....
other model names include SNAP-ON YA-2225 MARQUETTE M12155 CENTURY 82021
MATCO PCS21 PROARC 2500


if you get it lined out heres a place that sells tips and stuff for it.. you might call them and ask if they do repair work or if they know of anyone,,,
http://www.weldmart.com/SNAP%20ON%20...ING%20PAGE.htm

they also sell an updated torch kit for it. if you get it repaired and decide to keep it i would do the torch upgrade, it turns it into a pilot arc plasma..



you might try this place http://www.800abcweld.com/store/?crn...=1&action=show its the place thats listed on the front of your machine

here is a link to a service manual http://www.800abcweld.com/pdf/plasma...ice_manual.pdf


also, being since Lincoln Electric bought century you might try Lincoln.

[brucer]

i done some digging, found this stuff.. from what i found on the internet parts are available.. let us know how it turns out..

you have to use the century 82021 , marquette M12155 or matco PCS25 model numbers..

i found this on Lincoln Electrics site
http://www.lincolnelectric.com/asset...er%20Index.pdf

service manual
http://www.lincolnelectric.com/asset...5svcmanual.pdf

parts list
http://www.lincolnelectric.com/asset.../RPLM12155.pdf

[Michaeljp86]

i done some digging, found this stuff.. from what i found on the internet parts are available.. let us know how it turns out..

you have to use the century 82021 , marquette M12155 or matco PCS25 model numbers..

i found this on Lincoln Electrics site
http://www.lincolnelectric.com/asset...er%20Index.pdf

service manual
http://www.lincolnelectric.com/asset...5svcmanual.pdf

parts list
http://www.lincolnelectric.com/asset.../RPLM12155.pdf

That service manual has a schimatic of the circuit board but its different from this one. I appreciate the help, I think were getting a little closer to getting this going.

[ccawgc]

You call always try HTP America and a new place called Cebotechusa.com
I have found both places very helpful.

[jafinch78]

Anyone ever find a manual for the MAC/MATCO PSC25 by chance?

Wondering also, what the Lincoln model is called. Anyone know by chance what the Lincoln branded model was/is?

Thanks in advance for your time and support.

That service manual has a schimatic of the circuit board but its different from this one. I appreciate the help, I think were getting a little closer to getting this going.

[jafinch78]

Looks like the links are broken. Did you or anyone you know happen to save a copy they can share?

i done some digging, found this stuff.. from what i found on the internet parts are available.. let us know how it turns out..

you have to use the century 82021 , marquette M12155 or matco PCS25 model numbers..

i found this on Lincoln Electrics site
http://www.lincolnelectric.com/asset...er%20Index.pdf

service manual
http://www.lincolnelectric.com/asset...5svcmanual.pdf

parts list
http://www.lincolnelectric.com/asset.../RPLM12155.pdf