Results 1 to 2 of 2

Thread: New Member Intro

  1. #1
    Join Date
    May 2016
    Post Thanks / Like

    New Member Intro

    My name is Tony. I am a 28 year old father of two. I was first introduced to welding when I enrolled in Auto Body Repair courses at a local college. The extent of my practice was limited to spot welding and tack welding panels onto cars, repairing rust, etc. It wasn't until I completed my time in the Army and bought a house that I proceeded to expand my welding horizons. I had the need for a 14 foot rolling iron gate on one part of my 1.25 acre property so I took it as a challenge and constructed one myself. I think it turned out pretty well. Now I'm looking to build a 22ft rolling iron gate for the entrance to my property. I'm always looking for excuses to weld something so I'm looking for a good welding table idea. I also found plans for a gantry crane as well as a car trailer. Once finances allow, I'll try my hand at those projects. If anyone has any nice tables with measurements and instruction for construction, I'd be interested to see them. Thanks everyone, happy welding!

  2. #2
    Join Date
    May 2011
    Andover, Ohio
    Post Thanks / Like

    Re: New Member Intro

    Welcome to the forum Tony.
    Lincoln A/C 225
    Everlast P/A 200

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Page generated in 1,627,735,108.48098 seconds with 13 queries