Results 1 to 2 of 2

Thread: HF Roller / pipe bender stand + bandsaw

  1. #1
    Join Date
    Oct 2006
    Location
    Illinois
    Posts
    9,701
    Post Thanks / Like

    HF Roller / pipe bender stand + bandsaw

    Finally made time to fab up a stand for pipe roller and pipe bender. They both can be used as shown. The red pipe bender can also be unbolted from upright and positioned horizontal . That's the reason for the stout base. Can never overbuild.
    That's another busted casting on portaband that I bought cheap cheap. I patched the casting with a strip of sheet metal. Made a fixed base and table that will always be setup like that. This is used all the time and great for small material. Beats clamping material in vise and holding the saw.
    Name:  image.jpg
Views: 433
Size:  107.4 KB Name:  image.jpg
Views: 432
Size:  100.1 KBName:  image.jpg
Views: 427
Size:  107.1 KB

  2. #2
    Join Date
    Sep 2009
    Location
    ocala Fl.
    Posts
    364
    Post Thanks / Like

    Re: HF Roller / pipe bender stand + bandsaw

    I like your set up...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,628,205,697.63433 seconds with 12 queries