Results 1 to 3 of 3

Thread: PowerPro 256Si Rear panel Receptacle Output?

  1. #1
    Join Date
    Sep 2016
    Location
    American Samoa
    Posts
    309
    Post Thanks / Like

    PowerPro 256Si Rear panel Receptacle Output?

    Hello, how many amps does the cooler plug on the rear panel put out; the manual says 4 amps draw max. I tried to connect a 220v to 12v dc power supply with a 12v dc 1.6 peak amp diaphragm pump yesterday, but the power supply 3amp 250v ac fuse blew. I am thinking the power supply had an issue. Thanks, Steve

  2. #2
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,116
    Post Thanks / Like

    Re: PowerPro 256Si Rear panel Receptacle Output?

    I am not sure. That is a risk you run though. I've not personally heard anyone having issues with blowing that fuse. I am not saying it doesn't happen, I just don't hear about it. I usually hear about things like this.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  3. #3
    Join Date
    Sep 2016
    Location
    American Samoa
    Posts
    309
    Post Thanks / Like

    Re: PowerPro 256Si Rear panel Receptacle Output?

    Thanks for the reply; to be clear, the fuse that blew was not in the Everlast machine, it was in a separate power supply which was faulty. The company I bought it from has refunded my money and I found another one to run my pump. Once i have that running, i will have my welder completely functional

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,635,239,712.78167 seconds with 13 queries