Results 1 to 5 of 5

Thread: FS Mig,Tig,Stick unit

  1. #1
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    2,960
    Post Thanks / Like

    FS Mig,Tig,Stick unit

    I have 2 of these units for sale. $500 each

    Bought a few of these at auction. These were new DOA units. They have been completely taken apart and any repairs needed has been done, then tested in all modes. May have some small dents and scratch's, some accessory's have been used in testing.

    Not a bad unit for the money. Only thing is the mig will only take 8" wire spools. It is spool gun ready.
    It has 2 gas solenoids inside so all you need to do is Y the hose to the back of the unit for C25 and 100% argon.

    FEATURE
    1. IGBT & advanced PWM inverter technology
    2. High performance 32bit MCU and LCD display
    3. DC MIG, Lift-Tig, MMA function (Tig is lift arc starting)
    4. Arc force, hot start can be adjusted in the manual welding
    5. Current dropping and gas aspirated time can be adjusted in the argon arc welding
    6. Selective modules: EMC, VRD, PFC
    7. Synergic HOME function automatically manages ideal voltage while only adjusting wire feed speed
    8. Compact, light weight, portable
    9. Compatible POWER GENERATOR
    10. Intelligent Protection: over-voltage, low-voltage, over-current, over-heat

    220 Volt 50/60 Hz
    5 - 200 amp Tig
    5 - 200 amp Stick
    30 - 200 amp Mig

    Comes with Mig gun, Tig torch, Stick holder and work cable/clamp

    Can be picked up at my shop or shipped any were in the lower 48 states

    Shipping weight 50# Fedex or UPS Ground
    cost $35 to $75 insured depending on were you are.

    Pay with Cash, Paypal (3% fee), Postal money order, Check (takes 10 days to clear)

    Call me if you need more info or pictures.
    Attached Images Attached Images      
    www.georgesplasmacuttershop.com
    Plasma Cutter and Welder Sales and Repairs--Ebay store
    Tec.Mo. Dealer Consumables for the PT and IPT torch's

  2. #2
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    2,960
    Post Thanks / Like

    Re: FS Mig,Tig,Stick unit

    Up date one sold.
    www.georgesplasmacuttershop.com
    Plasma Cutter and Welder Sales and Repairs--Ebay store
    Tec.Mo. Dealer Consumables for the PT and IPT torch's

  3. #3
    Join Date
    Mar 2017
    Posts
    4
    Post Thanks / Like

    Re: FS Mig,Tig,Stick unit

    were are you located

    Sent from my LGLS775 using Tapatalk

  4. #4
    Join Date
    Apr 2004
    Location
    nw Pa.
    Posts
    52
    Post Thanks / Like

    Re: FS Mig,Tig,Stick unit

    Wondering if mug gun can be changed

  5. #5
    Join Date
    Feb 2009
    Location
    Chicago
    Posts
    6,228
    Post Thanks / Like

    Re: FS Mig,Tig,Stick unit

    Quote Originally Posted by Ray C. View Post
    Wondering if mug gun can be changed
    It's a euro mig gun. Of course you can change it
    Torchmate 2x2 CNC with Flashcut CNC controls
    Hypertherm Powermax45
    CK MT200 ac/dc
    Razorweld 195 Mig
    Razorweld 200ac/dc Tig
    Tormach 770, Tormach xstech
    Razorweld, Vipercut/Vipermig, SSC Foot Pedal Dealer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,623,661,412.70630 seconds with 14 queries