FS Mig,Tig,Stick unit

[mechanic416]

I have 2 of these units for sale. $500 each

Bought a few of these at auction. These were new DOA units. They have been completely taken apart and any repairs needed has been done, then tested in all modes. May have some small dents and scratch's, some accessory's have been used in testing.

Not a bad unit for the money. Only thing is the mig will only take 8" wire spools. It is spool gun ready.
It has 2 gas solenoids inside so all you need to do is Y the hose to the back of the unit for C25 and 100% argon.

FEATURE
1. IGBT & advanced PWM inverter technology
2. High performance 32bit MCU and LCD display
3. DC MIG, Lift-Tig, MMA function (Tig is lift arc starting)
4. Arc force, hot start can be adjusted in the manual welding
5. Current dropping and gas aspirated time can be adjusted in the argon arc welding
6. Selective modules: EMC, VRD, PFC
7. Synergic HOME function automatically manages ideal voltage while only adjusting wire feed speed
8. Compact, light weight, portable
9. Compatible POWER GENERATOR
10. Intelligent Protection: over-voltage, low-voltage, over-current, over-heat

220 Volt 50/60 Hz
5 - 200 amp Tig
5 - 200 amp Stick
30 - 200 amp Mig

Comes with Mig gun, Tig torch, Stick holder and work cable/clamp

Can be picked up at my shop or shipped any were in the lower 48 states

Shipping weight 50# Fedex or UPS Ground
cost $35 to $75 insured depending on were you are.

Pay with Cash, Paypal (3% fee), Postal money order, Check (takes 10 days to clear)

Call me if you need more info or pictures.

[mechanic416]

Up date one sold.

[bishopc247]

were are you located

Sent from my LGLS775 using Tapatalk

[Ray C.]

Wondering if mug gun can be changed

[Gamble]

Wondering if mug gun can be changed

It's a euro mig gun. Of course you can change it