Results 1 to 10 of 10

Thread: C25 prices

  1. #1
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    3,837
    Post Thanks / Like

    C25 prices

    Just curious what y'all are paying for a 125er of C25? I picked one up today & it was $42 & change.
    IMPEACH BIDEN!
    NRA LIFE MEMBER

    UNITWELD 175 AMP 3 IN1 DC
    MIDSTATES 300 AMP AC MACHINE
    GOD HELP AMERICA!
    “Freedom is never more than one generation away from extinction.
    We didn’t pass it to our children in the bloodstream".
    RONALD REAGAN

  2. #2
    Join Date
    May 2010
    Location
    Sparks, NV
    Posts
    9,636
    Post Thanks / Like

    Re: C25 prices

    Tiger Sales: AHP Distributor www.tigersalesco.com
    AHP200x; AHP 160ST; MM350P, Spoolmatic 30A; Everlast PowerTig 185; Thermal Dynamics 60i plasma.
    For Sale: Cobra Mig 250 w/ Push-pull gun. Lincoln Wirematic 250

  3. #3
    Join Date
    Oct 2015
    Posts
    2,810
    Post Thanks / Like

    Re: C25 prices

    I picked one up wensday it cost me $50.

  4. #4
    Join Date
    Apr 2018
    Location
    TN
    Posts
    307
    Post Thanks / Like

    Re: C25 prices

    http://weldingweb.com/vbb/showthread.php...s-Costs-Thread


    Mine is $37 and it is a fill. takes 2 days
    1957 Lincoln Idealarc 300 AC/DC
    2020 ESAB ES 180i MiniArc
    Lincoln Idealarc SP200
    Lincoln 3350 PAPR
    CK CK17FV
    CK CK9FV

  5. #5
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    3,837
    Post Thanks / Like

    Re: C25 prices

    Sounds like they are all within a few bucks of each other, I was fortunate on this bottle as it was given to me, along with a brake drum & rotor lathe that is in very good condition.
    IMPEACH BIDEN!
    NRA LIFE MEMBER

    UNITWELD 175 AMP 3 IN1 DC
    MIDSTATES 300 AMP AC MACHINE
    GOD HELP AMERICA!
    “Freedom is never more than one generation away from extinction.
    We didn’t pass it to our children in the bloodstream".
    RONALD REAGAN

  6. #6
    Join Date
    Mar 2008
    Location
    Georgetown, Texas
    Posts
    1,964
    Post Thanks / Like

    Re: C25 prices

    Have you tried CO2 instead of the mix. A 200 size bottle cost me $16 and there is virtually no difference in performance except maybe a little more penetration with the CO2.

  7. #7
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    3,837
    Post Thanks / Like

    Re: C25 prices

    No I haven't, I asked the yo-yo if anyone around here was using co2 and he pretty much said it was obsolete technology and no-one uses it anymore, he said too much spatter and mess, but it's great on dual shield. I didn't say anymore. Everything I read says it's a matter of "tuning" yourself and welder to it.
    IMPEACH BIDEN!
    NRA LIFE MEMBER

    UNITWELD 175 AMP 3 IN1 DC
    MIDSTATES 300 AMP AC MACHINE
    GOD HELP AMERICA!
    “Freedom is never more than one generation away from extinction.
    We didn’t pass it to our children in the bloodstream".
    RONALD REAGAN

  8. #8
    Join Date
    Nov 2016
    Posts
    35
    Post Thanks / Like

    Re: C25 prices

    my 50 cf i pay 35

    Sent from my LGLS992 using Tapatalk

  9. #9
    Join Date
    Jun 2016
    Location
    Back to the jungle
    Posts
    3,994
    Post Thanks / Like

    Re: C25 prices

    Quote Originally Posted by Bob View Post
    Have you tried CO2 instead of the mix. A 200 size bottle cost me $16 and there is virtually no difference in performance except maybe a little more penetration with the CO2.
    They've all been scammed. I was too for many many years until I left the US and found out what mixes cost here. I went right back to good ol CO2. Nary an issue and no spatter when you learn proper prep and fine tune the machine for what you are doing.When I began mig they didn't even offer mixes. Then they came up with the scam. Kinda like cholesterol meds......more nonsense

  10. #10
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    3,837
    Post Thanks / Like

    Re: C25 prices

    Maybe I'll get my small bottle filled with CO2 when it's empty, but I'm torn between that or argon for the very seldom aluminum repair I do. What is the proper prep needed, and does it need to run hotter or what?? My machine is pretty much auto set but do have inductance and vrd, 2t & 4t, so do have some ability to change it up some.
    IMPEACH BIDEN!
    NRA LIFE MEMBER

    UNITWELD 175 AMP 3 IN1 DC
    MIDSTATES 300 AMP AC MACHINE
    GOD HELP AMERICA!
    “Freedom is never more than one generation away from extinction.
    We didn’t pass it to our children in the bloodstream".
    RONALD REAGAN

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,624,502,375.39973 seconds with 11 queries