Magneto swap SA200

[Combat Louie]

I have a 1976 Blackface SA200. It has an Fairbanks Morse model FMXA4B-16A magneto on it. The guy I purchased it from said he was rebuilding the mag on the kitchen table. While he was out of town his wife cleaned the table off and lost some of the parts. I'm missing the entire bearing and point support plate, and the two gears.

So since I cant find a new Bearing support assembly. I got my hands on a American Bosch MRD-4A302-WW that was used on a red face SA200. Will it fit directly to my machine or will I have to change out the impulse coupler.

Thanks in advance for your time.

[charlie53843]

your good!! your # 1 plug wire will be 2 o'clock position , fairs banks is 11 o'clock

[Pipeliner]

Charlie's on the ball !!

[charlie53843]

Dam pipeliner !!!PRETTY PICTURES!!

[Pipeliner]

Dam pipeliner !!!PRETTY PICTURES!!

I put them in the SA200 sticky a couple of years ago. One for the FM too.