+ Reply to Thread
Results 1 to 3 of 3

Thread: magnum 100l gun, and a 210 mp

  1. #1
    Join Date
    Oct 2015
    Location
    NW New Jersey
    Posts
    1,414
    Post Thanks / Like

    magnum 100l gun, and a 210 mp

    I was wondering if a magnum 100l gun (Lincoln # K530-6) would work on a Lincoln 210mp. Having a small gun as a back up could be useful. There are a lot of fork truck incidents in the factory. I'm as nervous as a cat in a room full of rocking chairs. The drivers tear up a quite a few water hoses, extension cords, vacuum hoses. I try to be careful.... Nice to have a gun with a .023-.030 liner ready to go, to use with smaller stuff. Does it use different tips, and diffusers ?
    Airco 250 ac/dc Heliwelder Square wave
    Miller Synchrowave 180 sd
    Miller Econo Twin HF
    Lincoln 210 MP
    Dayton 225 ac/dc
    Victor torches
    Snap-On YA-212
    Lotos Cut60D
    Primeweld 225 ac/dc
    Primeweld mig180
    Miller AEAD-200

  2. #2
    Join Date
    Sep 2016
    Location
    Near Traverse City, Mi.
    Posts
    348
    Post Thanks / Like

    Re: magnum 100l gun, and a 210 mp

    Isn't the 100 the gun that comes on it?
    Miller Dynasty 280 DX, Lincoln 210 MP

  3. #3
    Join Date
    Oct 2015
    Location
    NW New Jersey
    Posts
    1,414
    Post Thanks / Like

    Re: magnum 100l gun, and a 210 mp

    The Pro magnum 175 is the gun that comes with it, they look fairly similar in pictures. Haven't really had any problems with the 175 . Just hate taking the gun, trigger and tube apart to change liners. Snapping , and unsnapping the gun seems like it would eventually break. I'm guessing that it would be lighter too, but don't really know.
    Airco 250 ac/dc Heliwelder Square wave
    Miller Synchrowave 180 sd
    Miller Econo Twin HF
    Lincoln 210 MP
    Dayton 225 ac/dc
    Victor torches
    Snap-On YA-212
    Lotos Cut60D
    Primeweld 225 ac/dc
    Primeweld mig180
    Miller AEAD-200

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

A) Welding/Fabrication Shop
B) Plant/Production Line
C) Infrastructure/Construction/Repair or Maintenance/Field Work
D) Distributor of Welding Supplies or Gases
E) College/School/University
F) Work Out of Home

A) Corporate Executive/Management
B) Operations Management
C) Engineering Management
D) Educator/Student
E) Retired
F) Hobbyist

Log-in

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,713,272,910.66555 seconds with 20 queries