Results 1 to 7 of 7

Thread: Cutting tip help

  1. #1
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    3,837
    Post Thanks / Like

    Cutting tip help

    Ok, I got my torch identified as a HARRIS, by the sequence of numbers off the regulators found in the link from the other thread. I would like to get a couple of tips, BUT the HARRIS tips I'm finding have a flat bottom with radial grooves, mine looks more like a victor tip, but I'm not sure.
    There is an additional marking that is damaged approximately centered above the word CRAFTSMAN, it may be a 8 but I cant tell for sure because od some damage there.



    The tip is stamped CRAFTSMAN
    5447...B - 3

    If anyone can help me out on this I would appreciate it greatly!! Thanks y'all
    IMPEACH BIDEN!
    NRA LIFE MEMBER

    UNITWELD 175 AMP 3 IN1 DC
    MIDSTATES 300 AMP AC MACHINE
    GOD HELP AMERICA!
    “Freedom is never more than one generation away from extinction.
    We didn’t pass it to our children in the bloodstream".
    RONALD REAGAN

  2. #2
    Join Date
    Jan 2012
    Posts
    216
    Post Thanks / Like

    Re: Cutting tip help

    Harris did and still does make Victor compatible cutting torches and tips.

  3. #3
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    3,837
    Post Thanks / Like

    Re: Cutting tip help

    Hmm, I have a buddy bringing a victor tip for me to try tomorrow, thanks ironrail.
    IMPEACH BIDEN!
    NRA LIFE MEMBER

    UNITWELD 175 AMP 3 IN1 DC
    MIDSTATES 300 AMP AC MACHINE
    GOD HELP AMERICA!
    “Freedom is never more than one generation away from extinction.
    We didn’t pass it to our children in the bloodstream".
    RONALD REAGAN

  4. #4
    Join Date
    Mar 2017
    Location
    bar stool
    Posts
    2,074
    Post Thanks / Like

    Re: Cutting tip help

    https://www.regulatortorchrepair.com/contact/

    He carrys Victor & Harris and speaks truth.

  5. #5
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    3,837
    Post Thanks / Like

    Re: Cutting tip help

    Thanks Virgil5
    IMPEACH BIDEN!
    NRA LIFE MEMBER

    UNITWELD 175 AMP 3 IN1 DC
    MIDSTATES 300 AMP AC MACHINE
    GOD HELP AMERICA!
    “Freedom is never more than one generation away from extinction.
    We didn’t pass it to our children in the bloodstream".
    RONALD REAGAN

  6. #6
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    3,837
    Post Thanks / Like

    Re: Cutting tip help

    Well hell, I thought I had this figured out, until I contacted regulatortorchrepair.com, I thought I had it pinned down by the 3 number prefix of 624 that exists on both regulators and the torch body, that crosses to HARRIS as the manufacturer, BUT, regulatortorchrepair is telling me that HARRIS did not build torches for CRAFTSMAN during that era(mid-late 50"s) said to send a picture of the torch and that tips were still available. For now, I've connected my old OXWELD, I have 6 or 8 or more new tips for it, probably outlast me! I'll just connect the CRAFTSMAN up if I need/want to gas weld or braze something.
    IMPEACH BIDEN!
    NRA LIFE MEMBER

    UNITWELD 175 AMP 3 IN1 DC
    MIDSTATES 300 AMP AC MACHINE
    GOD HELP AMERICA!
    “Freedom is never more than one generation away from extinction.
    We didn’t pass it to our children in the bloodstream".
    RONALD REAGAN

  7. #7
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    3,837
    Post Thanks / Like

    Re: Cutting tip help

    I determined both those torches are getting unsafe so I bit the bullet and ordered a new torch, It's a victor compatible unit from Amazon, I'm sure it's Chinese unit, but it appears that most of them are, seems like almost everyone has shifted manufacturing offshore. I'm reasonably sure it will outlast me, so that's pretty much all that matters.
    IMPEACH BIDEN!
    NRA LIFE MEMBER

    UNITWELD 175 AMP 3 IN1 DC
    MIDSTATES 300 AMP AC MACHINE
    GOD HELP AMERICA!
    “Freedom is never more than one generation away from extinction.
    We didn’t pass it to our children in the bloodstream".
    RONALD REAGAN

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,624,505,654.13871 seconds with 11 queries