Results 1 to 11 of 11

Thread: Cant find Miller PC 1 board any where

  1. #1
    Join Date
    Mar 2008
    Location
    Georgetown, Texas
    Posts
    1,961
    Post Thanks / Like

    Cant find Miller PC 1 board any where

    I need a PC 1 board, # 209836 for my TB 301G, AC/DC and it seems to not exist. I've checked every place I can think of including Miller and no luck. Any one have any suggestions where I might find one?

  2. #2
    Join Date
    Dec 2018
    Posts
    4,997
    Post Thanks / Like

    Re: Cant find Miller PC 1 board any where

    Best I can come up with, might be others.....

    https://www.eicrepair.com/servicing-miller.html

    Page down thru the list, and it shows your control board number.

  3. #3
    Join Date
    Mar 2011
    Location
    Western Washington
    Posts
    10,551
    Post Thanks / Like

    Re: Cant find Miller PC 1 board any where

    According to this thread ->https://weldingweb.com/vbb/showthread.ph...d-or-aux-power The miller part number has changed to 212708

  4. #4
    Join Date
    Dec 2018
    Posts
    4,997
    Post Thanks / Like

    Re: Cant find Miller PC 1 board any where

    Quote Originally Posted by ronsii View Post
    According to this thread ->https://weldingweb.com/vbb/showthread.ph...d-or-aux-power The miller part number has changed to 212708
    http://www.brweldingsupplies.com/mil...rd-assy-power/

  5. #5
    Join Date
    Jun 2016
    Location
    Back to the jungle
    Posts
    3,994
    Post Thanks / Like

    Re: Cant find Miller PC 1 board any where

    No email. NO Whatsapps. Call these dudes
    http://www.yorkelectronics.com/

  6. #6
    Join Date
    Jul 2008
    Posts
    2,904
    Post Thanks / Like

    Re: Cant find Miller PC 1 board any where

    Assuming Ronsii is correct that the p/n changed to 212708, it's $517.49 here:

    https://www.miller4less.com/product_...ucts_id=115871

  7. #7
    Join Date
    Mar 2011
    Location
    Western Washington
    Posts
    10,551
    Post Thanks / Like

    Re: Cant find Miller PC 1 board any where

    I also found quite a few people listing the newer p/n AGW listed in the other thread for prices all over the board there is also tons of listing for places that *supposedly* fix you board... a buddy of mine sent out a board I looked at once because I told him it was beyond my capabilities... they sent it back to him with a 600$ invoice for cleaning and repair!!! And it still didn't work!!! After he brought it back to me to look over I determined they hadn't done anymore than myself so buyer beware on these so called repair sites!!!

  8. #8
    Join Date
    Jul 2008
    Posts
    2,904
    Post Thanks / Like

    Re: Cant find Miller PC 1 board any where

    ...and then there are the stories you hear of guys putting in a new board -- especially in the supercalifragilistic inverters -- and the smoke leaks out as soon as they power up because something else in the welder roached the board in the first place...

  9. #9
    Join Date
    Mar 2011
    Location
    Western Washington
    Posts
    10,551
    Post Thanks / Like

    Re: Cant find Miller PC 1 board any where

    Yep, seen a lot of guys do that cause they didn't check the interconnected boards

  10. #10
    Join Date
    Mar 2008
    Location
    Georgetown, Texas
    Posts
    1,961
    Post Thanks / Like

    Re: Cant find Miller PC 1 board any where

    It seems that my problem is from the 200 ohm, tube resistor, R1, breaking and shorting out on the board. There are 3 big black places on the board.

  11. #11
    Join Date
    Dec 2018
    Posts
    4,997
    Post Thanks / Like

    Re: Cant find Miller PC 1 board any where

    So...………..gonna fix it,, or buy a new welder??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,624,062,485.14800 seconds with 13 queries