Results 1 to 1 of 1

Thread: Crown Alloys .035" 308 Wire, 25lbs

  1. #1
    Join Date
    Sep 2016
    Location
    Detroit, Michigan
    Posts
    878
    Post Thanks / Like

    Crown Alloys .035" 308 Wire, 25lbs

    I wound up with two spools of this and rarely do stainless with the MIG. It was a 30lb spool and has about 5lbs gone....weighed 27lbs on my scale, and a similar empty spool weighed 1lb. I've had really good luck with Crown Alloys products, and they've been really helpful when I've called to ask for advice....great folks. $110 PayPal friends and family, which will include shipping via USPS Flat-Rate box.

    http://www.crownalloys.com/TechSheet...ning_&_PWP.pdf
    Attached Images Attached Images    
    Check out my bench vise website:
    http://mivise.com


    Miller Syncrowave 250DX
    Millermatic 350P with XR AlumaPro
    Miller Regency 200 with 22A feeder and Spoolmatic 3
    Hobart Champion Elite
    Everlast PowerTig 210EXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,624,567,105.10570 seconds with 14 queries