Results 1 to 2 of 2

Thread: Tweco No. 2 with Mig-Kwik adapter

  1. #1
    Join Date
    Sep 2016
    Location
    Detroit, Michigan
    Posts
    871
    Post Thanks / Like

    Tweco No. 2 with Mig-Kwik adapter

    I bought another old welder and this gun came with it, but didn't match the machine setup, so I have no use for it. It appears to be complete and setup for .035" wire going off the contact tip. I didn't notice any cuts to the outer cover but it's clearly been used. How about $50 plus shipping...it will probably fit in a USPS flat-rate box (I'm going to check).

    Name:  IMG_8766.jpg
Views: 228
Size:  154.6 KB
    Name:  IMG_8767.jpg
Views: 215
Size:  198.3 KB
    Name:  IMG_8768.jpg
Views: 219
Size:  207.6 KB
    Name:  IMG_8769.jpg
Views: 225
Size:  188.0 KB
    Name:  IMG_8771.jpg
Views: 212
Size:  203.9 KB
    Check out my bench vise website:
    http://mivise.com


    Miller Syncrowave 250DX
    Millermatic 350P with XR AlumaPro
    Miller Regency 200 with 22A feeder and Spoolmatic 3
    Hobart Champion Elite
    Everlast PowerTig 210EXT

  2. #2
    Join Date
    Sep 2016
    Location
    Detroit, Michigan
    Posts
    871
    Post Thanks / Like

    Re: Tweco No. 2 with Mig-Kwik adapter

    Name:  IMG_8772.jpg
Views: 160
Size:  129.3 KB
    Name:  IMG_8773.jpg
Views: 158
Size:  131.1 KB
    Name:  IMG_8774.jpg
Views: 149
Size:  170.7 KB
    Check out my bench vise website:
    http://mivise.com


    Miller Syncrowave 250DX
    Millermatic 350P with XR AlumaPro
    Miller Regency 200 with 22A feeder and Spoolmatic 3
    Hobart Champion Elite
    Everlast PowerTig 210EXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,623,832,650.79105 seconds with 12 queries