Power i-MIG 315. Basic MIG, smart buy
The new Power i-MIG 315 has arrived.
For those looking for "just a basic larger MIG" this is the one for you. With output at 315 Amps @ 35% duty cycle and 250 amps @ 60% duty cycle, this is a MIG ready to weld. No synergic or power set functions. However, it is well equipped with some of the finer points of a larger MIG machine that are often offered as options.
1. Self contained, with its own under carriage and cylinder rack.
2. Auto pre/post flow.
3. 4 roll gear driven cast aluminum and steel wire feeder capable of up to 700 ipm
4. Burn Back Control
5. Spot and Stitch timers.
6. Arc Force/Inductance Control
7. Stick Function
8. IGBT inverter based.
9. 5 Year warranty Parts and Labor.
10. 240V 1 phase input. (Inquire about 3 phase needs).
Esab Migmaster 250
Lincoln SA 200
Lincoln Ranger 8
Smith Oxy Fuel setup
Everlast PowerPlasma 80
Everlast Power iMIG 160
Everlast Power iMIG 205
Everlast Power iMIG 140E
Everlast PowerARC 300
Everlast PowerARC 140ST
Everlast PowerTIG 255EXT