Page 2 of 2 FirstFirst 12
Results 26 to 27 of 27

Thread: FYI HTP is having a sale on the Pro Pulse 220 MTS/Invertig 400/MIG 200i

  1. #26
    Join Date
    Oct 2016
    Posts
    418
    Post Thanks / Like

    Re: FYI HTP is having a sale on the Pro Pulse 220 MTS/Invertig 400/MIG 200i

    [QUOTE=455dan;8848662]Well I did my 1st real steel welds with the ProPulse 220MTS

    Getting my small trailer back in shape to haul a Golf cart my wife bought. May be buying a metal lathe to.
    Ordered new tires, need to replace some of the 2 X 6 floor boards.

    I built/converted this trailer a decade ago out of a junk boat trailer, We made due with the hitch but the PO had jack knifed it and bent the hitch which always made hitching/ unhooking the trailer a real pain.
    Cut the old Hitch off and drilled holes in the neck to hold the new hitch . I used the stitch program to weld in the backing plate and nuts because there is no way to get to them once the hitch is put over the square tubing. 1736443[/ATTACH]




    More work on this trailer. I lent it out last year to a friend that lives out in the boonies. Didn't notice it until I put the trailer in the garage to mount the new tires . One Fender front had hooked something and been torn where I ham handedly repaired it with TIG and rivets a few years ago.
    The fenders are aluminum .

    Time to give the ProPulse a shot at an Aluminum MIG repair.

    Put it in the press to straighten it out a bit. Then some bending with crescent wrenches.
    MIG, Flap disc Grinding, MIG, flap disc grinding.

    Still Ugly, but it is better overall mounting wise.
    Most of the Aluminum was around .035 thick new. Pretty happy I could get a weld without burning through everywhere. Also happy still haven't had a birds nest.

    The front piece, Name:  PXL_20220218_231602213.jpg
Views: 127
Size:  109.4 KB
    Name:  PXL_20220218_234543610.jpg
Views: 125
Size:  248.0 KBouchAttachment 1736685[ATTACH=CONFIG]17Name:  PXL_20220219_003314106.jpg
Views: 118
Size:  264.7 KBName:  PXL_20220219_005836229.jpg
Views: 131
Size:  157.6 KB36686[/ATTACH]
    Last edited by 455dan; 02-19-2022 at 03:00 AM.
    HTP Pro Pulse 220 MTS (Anniversary Edition)
    1962 Idealarc TIG 300 300
    1974 Idealarc TIG 300 300
    1988 HF Power MIG 150
    2015 Lotos Ltpdc2000d plasma/Stick/TIG
    Victor 100 torch, 200- 210 Oxy/Acet gauges

  2. Likes Oscar liked this post
  3. #27
    Join Date
    Oct 2016
    Posts
    418
    Post Thanks / Like

    Re: FYI HTP is having a sale on the Pro Pulse 220 MTS/Invertig 400/MIG 200i

    Duplicate post
    Last edited by 455dan; 02-19-2022 at 01:39 AM.
    HTP Pro Pulse 220 MTS (Anniversary Edition)
    1962 Idealarc TIG 300 300
    1974 Idealarc TIG 300 300
    1988 HF Power MIG 150
    2015 Lotos Ltpdc2000d plasma/Stick/TIG
    Victor 100 torch, 200- 210 Oxy/Acet gauges

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,664,116,122.15545 seconds with 15 queries