Results 1 to 1 of 1

Thread: Lightning MTS 225

  1. #1
    Join Date
    Nov 2008
    south GA where its hot in summer and cold in winter
    Post Thanks / Like

    Lightning MTS 225

    The Lightning MTS 275 has been a success and producing them as fast as we can sell them.

    We've also introduce its smaller sibling the Lighting MTS 225. Same type of unit, with AC/DC TIG (Pulse on both DC and AC), wave form control. etc. There are a few minor differences as in keeping with our design philosophy, the more amperage you need, the more features you are likely to require. It has less wave forms, but the ones you need. No spot or stitch timers, but the unit is still well appointed. This unit is the replacement for the PowerMTS 221STi. It is in stock and is selling well as well. The unit is smaller physically and is only 200 amp output. It holds a 10 lb roll of wire. But it also has the powerset function like the Lightning MTS 275. It is dual voltage and has two input for both MIG and TIG gas, so you can keep both gases connected at the same time.
    Attached Images Attached Images     
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Page generated in 1,627,074,903.57848 seconds with 14 queries