60 INCH Mechanical Shear

[lotechman]

Good score. Just be mindful that it is not hydraulic and once you engage the clutch it will follow through its stroke until it returns up. Think before you press down because you can't stop it mid stroke.

[Lis2323]

Good score. Just be mindful that it is not hydraulic and once you engage the clutch it will follow through its stroke until it returns up. Think before you press down because you can't stop it mid stroke.

Thanks for pointing that out although I am quite familiar with the concept, (I have a Pendinghaus 60 ton mechanical iron worker) these machines have to be treated with respect.

[ronsii]

Thanks for pointing that out although I am quite familiar with the concept, (I have a Pendinghaus 60 ton mechanical iron worker) these machines have to be treated with respect.

It's so pretty!!!! I don't even mind that it's yellow but that red leg

[Lis2323]

It's so pretty!!!! I don't even mind that it's yellow but that red leg

I painted it red so no one would trip over it. Got YOUR attention didn’t it?

[Lis2323]

So yesterday I answered an ad for a fellow looking for a mig gas bottle.

Today I sold him this full 330 cu ft bottle of C25 which MORE than paid for the shear.

Some days just seem to go so smooth.....

Edit. Oops forgot the pic

And my point being I got a good deal on the shear —- I did NOT overcharge for the bottle.

[Welder Dave]

What don't you have? Peddinghaus is top of the line in mechanical iron workers and yours look mint! My first welding job at a tank shop they had a 105 ton Peddinghaus 210 Super 20. It was the cats meow but no stopping once you push the pedal or press the button for the punch. I liked the punch because you could lower it onto your center punch mark.

[Lis2323]

I liked the punch because you could lower it onto your center punch mark.

This is the only IW I have ever used so I have zero experience but I can’t imagine NOT having this feature.

[ronsii]

What don't you have? Peddinghaus is top of the line in mechanical iron workers and yours look mint! My first welding job at a tank shop they had a 105 ton Peddinghaus 210 Super 20. It was the cats meow but no stopping once you push the pedal or press the button for the punch. I liked the punch because you could lower it onto your center punch mark.

He doesn't have a charcoal forge...

[Lis2323]

He doesn't have a charcoal forge...

Lol Too funny!

[Welder Dave]

Yet! I used a 120 ton Kingsland hyd. ironworker and in order to line up the center punch mark you had to put it in jog mode and then switch it back to punch mode. Kind of annoying. Most of the guys tried to lift the plate up to the punch mark instead playing with the switch.

[Lis2323]

Yet! I used a 120 ton Kingsland hyd. ironworker and in order to line up the center punch mark you had to put it in jog mode and then switch it back to punch mode. Kind of annoying. Most of the guys tried to lift the plate up to the punch mark instead playing with the switch.

That’s the quickest way If I have a good center punch divot and the workpiece is small enough to lift easily.

Oh I think ronsii was alluding to this pic of me from the fork lift waving goodbye to my solid fuel forge.

[Welder Dave]

On the Peddinghaus, you pulled the handle forward and the punch would lower and you could lift the punch up and down to line it up. Then you pushed the button on the end and it punched the hole. Once you release the handle to lower the punch, the only way to reset in the up position is to push the button to punch. Never have to lift anything. Punched a lot of rectangular manways for tanks with it.

[Lis2323]

With a few modifications a can of SPAM should fit but I doubt it would slice to your obvious high standards.


Sent from my iPhone using Tapatalk

[ronsii]

With a few modifications a can of SPAM should fit but I doubt it would slice to your obvious high standards.


Sent from my iPhone using Tapatalk

I almost writ up a similar post but just hit the triangle instead... should have done the post thing instead

[Lis2323]

I almost writ up a similar post but just hit the triangle instead... should have done the post thing instead

Triangle?


Sent from my iPad using Tapatalk

[ronsii]

Triangle?


Sent from my iPad using Tapatalk

This one... it sometimes doesn't show up on a regular web browser... and I forget what it is or looks like on a phone browser???

[Lis2323]

Huh. I don't even have a DISLIKE option.




Sent from my iPhone using Tapatalk

[scsmith42]

Nice score!

[Lis2323]

Nice score!

Thanks, scsmith!


Sent from my iPad using Tapatalk

[Reebz]

Nice job.

[Lis2323]

Nice job! May I ask if we want to make repairs to the apartment. To do this, we ordered a design from a good company [SPAM LINK REMOVED] and in order to finish, we need to find a person who has mechanical shear. It is possible for a private person or company to help us with the completion of the repair. We pay in cash, just the furniture has already been brought and the repair is not yet finished and the furniture is just standing idle. And I want to ask if Mechanical Shear are suitable for cutting logs for making a fence, I am not an expert and I do not know what size you can make a fence. Tell me what the minimum and maximum sizes are, you can roughly tell how large they will be.

Maxwel I would be happy to oblige. PM me your credit card number, expiration date and ccv. I will do the rest. Cheers!


Sent from my iPad using Tapatalk

[Lis2323]

Sent from my iPad using Tapatalk