Results 1 to 2 of 2

Thread: Power i-MIG 200E liner

  1. #1
    Join Date
    Oct 2005
    Guelph, Ontario Canada
    Post Thanks / Like

    Power i-MIG 200E liner

    Hello All!

    Looking at the Power i-MIG 200E to replace my old Lincoln SP-135T. I want to weld thicker material using gas, not flux core. The Lincoln was very limited in thickness when using gas. The i-MIG 200E seems to fit the bill for me (especially price wise).
    The manual lists .023, .030 and .035 wire sizes. I know I'll have to change tips, but will I need to change the liner if changing wire size?

  2. #2
    Join Date
    Nov 2008
    south GA where its hot in summer and cold in winter
    Post Thanks / Like

    Re: Power i-MIG 200E liner

    No. But .035 will be limited on what you can do.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Page generated in 1,632,133,317.65283 seconds with 11 queries