Compressor Oil Change

[whtbaron]

Yep. My Quincy came stock with a small nipple/cap.

EZ-PZ.

Even easier would be to fit it with the right size valve and an elbow... hmmm....

[Lis2323]

[whtbaron]

LOL.... I hope not, but that just might turn into the dustiest corner of your shop...

[MinnesotaDave]

If you're worried about breaking a nipple off on the air compressor drain you can use a piece of hydraulic hose with a cap on it. That's what's on a lot of the heavy equipment I work on.

I like this idea for several applications

[farmersammm]

I don't mess with any fancy drain methods.

I just open 'er up, and let the oil run all over the floor.

The dog licks it all up.

Then comes in the house, and pukes all over the carpet.

I call that recycling

[whtbaron]

I used to think Yukon was a bad hunter... I've since learned he's just a picky eater. Loves rabbits and raccoons... very rare, as opposed to well done. He doesn't touch anything I spill, and I've taught him to walk away when I'm welding. That's a plus.

[Lis2323]

I've taught him to walk away when I'm welding. .

Does he shake his head (side to side)? Come to think of it NEITHER of us post pics of our beads!


Sent from my iPad using Tapatalk

[whtbaron]

lol.... olive oil and apple cider vinegar cures the yeast infection in their ears.... less head shaking...

[Kelvin]

Just sold mine......used it mainly for Wheel Line mover engine oil changes in the field.

6 gallon All steel Made in USA!

I use one of these jobbies:



Pulls a full 14# of vacuum (it'll crush the can if you're not careful) and it's great for pulling the motor oil out of my inboard 350 way down in the bilge...

[whtbaron]

Does he shake his head (side to side)? Come to think of it NEITHER of us post pics of our beads!


Sent from my iPad using Tapatalk

Because they're just toooo purdy.... this is what happens when you keep using a 4020 for a D-9....Had to completely replace the center section that had been patched a million times this spring....

[ronsii]

Because they're just toooo purdy.... this is what happens when you keep using a 4020 for a D-9....Had to completely replace the center section that had been patched a million times this spring....

Naaaaahh, that ain't too bad..... if you'd just slop some paint on it it'd look a million times better

[John T]

I use one of these jobbies:
...

I've got the Mityvac sucker but never thought to use it on the C-pressor...

seems ez enough to just unscrew the nipple cap...

.
Mityvac is great though...

[Lis2323]

this is what happens when you keep using a 4020 for a D-9....]

Farmers do that???? Who’d a thunk?.lol

[Lis2323]

Farmers do that???? Who’d a thunk?.lol

Actually we did worse when I was a kid. Using Fordson Dextas and Ford 3000’s ( 30 odd horses) like a 4020.


Sent from my iPad using Tapatalk

[ronsii]

Actually we did worse when I was a kid. Using Fordson Dextas and Ford 3000’s ( 30 odd horses) like a 4020.


Sent from my iPad using Tapatalk

So... does using a 5 horse riding mower with a pipe strapped to the front for a 'blade' count??? I do remember breaking the frame in half on that one

[Lis2323]

So... does using a 5 horse riding mower with a pipe strapped to the front for a 'blade' count??? I do remember breaking the frame in half on that one

Only if that pipe “blade” was counterweight for pullin’ the sled in those E Wa tractor pulls.


Sent from my iPad using Tapatalk

[ronsii]

Only if that pipe “blade” was counterweight for pullin’ the sled in those E Wa tractor pulls.


Sent from my iPad using Tapatalk

Not quite.... did try to pull a few 'stumps' though... it's final demise was in 'clearing use' as a stump grinder broke the crankshaft off

[whtbaron]

Farmers do that???? Who’d a thunk?.lol

Well, Ronsii was supposed to come and dig out some nasty one's today with his hoe, but he was all hungover and wussed out....

[ronsii]

Well, Ronsii was supposed to come and dig out some nasty one's today with his hoe, but he was all hungover and wussed out....

Huh no I had to do a bunch of catchup work that Sid would have normally done... but he's not back from his little excursion yet....he always was pretty slow on just about everything.

[Lis2323]

Well, Ronsii was supposed to come and dig out some nasty one's today with his hoe, but he was all hungover and wussed out....

I’m sure he would have given you a break on travel time (22hr?) and most likely pulled your stump for free

[ronsii]

I’m sure he would have given you a break on travel time (22hr?) and most likely pulled your stump for free

yep... mobe fees are where the real money is at

[whtbaron]

Well.... I was hoping to get my rocks off, but nobody is touching my stump...

[Lis2323]

Lol. I was waiting for something like that.


Sent from my iPad using Tapatalk

[DavidR8]

Well.... I was hoping to get my rocks off, but nobody is touching my stump...

Dang it!
Read this while drinking my morning tea.
Gotta go change into a clean shirt now


Sent from my iPhone using Tapatalk

[ronsii]

Lol. I was waiting for something like that.


Sent from my iPad using Tapatalk

So was I... but I figured it would be from one of those farmer types